{"title":"All materials","description":"","products":[{"product_id":"acrylaat-zwart","title":"Acrylic black","description":"\u003cp\u003eBlack acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, opaque plastic. The material is available in various colours, UV resistant and suitable for both indoor and outdoor use.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eBlack Acrylic has many applications, mainly in decorative industries. Acrylic can be found in showcases, interior construction, displays, facade advertising, (name) signs and models. \u003c\/p\u003e  \u003cp\u003eBecause the material has a high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a replacement for glass. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are few restrictions when cutting acrylic. When using finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breaks. \u003cspan\u003eAcrylic is also relatively fragile in thin or long strips and is sensitive to warping due to the heat released during cutting, so take this into account in your design.\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAcrylic has protective film on both sides, which means the plates are fully protected before, during and after cutting. The cut is tight, clean and the same colour as the material. Engraving areas have a slightly whiter colour compared to the material. \u003c\/p\u003e  \u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the foil on both sides. If there are engraving areas in the design, we must remove the foil from the top, in some cases a small amount of smoke can then affect the material. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn principle Acrylic does not require post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded or milled afterwards and bent. With every operation it is important to take into account that the cutting process puts pressure on the cutting edge, if the acrylic is then processed then in some cases small cracks can occur. \u003c\/p\u003e  \u003cp\u003eTo give line and surface engravings a greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eDepending on whether there are engraving areas in the design, the material will have protective film on both the front and back or only the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e  \u003cp\u003eAcrylic has a light surface gloss, surface engravings have a matt white appearance. Engraving lines are clearly visible from close up. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" style=\"width: 530px;\"\u003e  \u003ccolgroup\u003e  \u003ccol width=\"64\"\u003e  \u003ccol width=\"83\"\u003e  \u003ccol width=\"41\"\u003e  \u003ccol width=\"99\"\u003e  \u003c\/colgroup\u003e  \u003ctbody\u003e  \u003ctr style=\"height: 41px;\"\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Dichtheid\"}' style=\"height: 41px; width: 69px;\"\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Diktetolerantie\"}' style=\"height: 41px; width: 105px;\"\u003e\u003cstrong\u003eThickness tolerance\u003c\/strong\u003e\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Geschikt voor buitenshuis gebruik\"}' style=\"height: 41px; width: 131px;\"\u003e\u003cstrong\u003eSuitable for outdoor use\u003c\/strong\u003e\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snedebreedte\"}' style=\"height: 41px; width: 86px;\"\u003e\u003cstrong\u003eCutting width\u003c\/strong\u003e\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snedebreedte\"}' style=\"height: 41px; width: 131px;\"\u003e\u003cstrong\u003eType acrylic\u003c\/strong\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr style=\"height: 22px;\"\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"1.2\"}' style=\"height: 22px; width: 69px;\"\u003e1.2 g\/cm\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"\u0026lt;0.1mm\"}' style=\"height: 22px; width: 105px;\"\u003e\u0026lt;15%\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Ja\"}' style=\"height: 22px; width: 131px;\"\u003eYes\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"0.2 mm\"}' style=\"height: 22px; width: 86px;\"\u003e0.2 mm\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"0.2 mm\"}' style=\"height: 22px; width: 131px;\"\u003eCast\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29216681951330,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/zwart-acrylaat-959234.jpg?v=1658694529"},{"product_id":"acrylaat-wit","title":"Acrylic white","description":"\u003cp\u003eWhite acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, almost completely opaque plastic. The material is very stiff and brittle compared to other plastics. White acrylic is UV resistant and suitable for both indoor and outdoor use. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eWhite Acrylic has many applications, mainly in decorative industries. Acrylic can be found in showcases, interior construction, displays, facade advertising, (name) signs and models. \u003c\/p\u003e  \u003cp\u003eBecause the material has a high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a replacement for glass. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are few restrictions when cutting acrylic. With finger joints it is important to take into account the thickness tolerances of acrylic to prevent internal tensions and thus cracks or breakage. Acrylic is also relatively fragile in thin or long strips and sensitive to warping due to the heat released during cutting, take this into account in the design.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAcrylic has a protective film on both sides, which means the plates are fully protected before, during and after cutting. The cut is straight, clean and the same colour as the material. Engraving areas have a slightly matte color compared to the material. \u003c\/p\u003e  \u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the foil on both sides. If there are engraving areas in the design, we must remove the foil from the top, in some cases a small amount of smoke can then affect the material. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 250x130cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003eDouble-sided adhesive foil\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e  \u003cp\u003eIn principle acrylic does not need to be post-processed. The material can be glued, printed, sawn, sanded, milled afterwards and bent. With every operation it is important to take into account that the cutting process puts pressure on the cutting edge, if the acrylic is then processed then in some cases small cracks can occur. \u003c\/p\u003e  \u003cp\u003eTo give line and surface engravings a greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eDepending on whether there are engraving areas in the design, the material will have protective film on both the front and back or only the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e  \u003cp\u003eAcrylic has a light surface gloss, surface engravings have a matt white appearance. Engraving lines and surfaces are reasonably visible from close up. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003e  \u003cspan\u003e\u003cstrong\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eDensity\u003c\/td\u003e  \u003ctd\u003e1.2 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eThickness tolerance\u003c\/td\u003e  \u003ctd\u003e\u0026lt;15%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eUV resistant\u003c\/td\u003e  \u003ctd\u003eYes\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eType acrylic\u003c\/td\u003e  \u003ctd\u003eCast\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29216908509282,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/wit-acrylaat-720694.jpg?v=1658954057"},{"product_id":"acrylaat-spiegel-goud","title":"Acrylic Mirror Gold","description":"\u003cp\u003eMirror acrylic (PMMA) has a mirrored surface on one side and reflects light just like a normal mirror. In addition, the material is lighter than a glass mirror, what the material a excellent replacement for a glass mirror.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eMirror acrylic Acrylic has many applications, mainly in decorative industries. Acrylic can be found in showcases, interior construction, displays, facade advertising, (name) signs and models. \u003c\/p\u003e  \u003cp\u003eBecause the material has a high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a replacement for glass. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are few restrictions when cutting acrylic. When using finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breaks. \u003cspan\u003eAcrylic is also relatively fragile in thin or long strips and is sensitive to warping due to the heat released during cutting, so take this into account in your design.\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAcrylic mirror has a protective film on the front, which means the mirror is fully protected before, during and after cutting. The cut is tight, clean and the same colour as the material. Engraving areas have a slightly whiter colour compared to the material. \u003c\/p\u003e  \u003cp\u003eIf there are line or surface engravings in the design, the complete design will be cut and engraved in mirror image on the back (the design does not need to be printed for this). to be put in mirror image, we do this). Engravings are done as standard on the back of the mirror in mirror image to prevent reflection of the engraving. Engraving on the front is also possible, this gives a 3D effect because the engraving is also reflected. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 250x130cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003eDouble-sided adhesive foil\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn principle Acrylic does not require post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded or milled afterwards and bent. With every operation it is important to take into account that the cutting process puts pressure on the cutting edge, if the acrylic is then processed then in some cases small cracks can occur. \u003c\/p\u003e  \u003cp\u003eTo give line and surface engravings a greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe material always has a protective film on the front, the back lacks a protective film. Engraving lines and surfaces are engraved from the back (in the mirror layer). The material is scratch-sensitive without a protective film.\u003c\/p\u003e  \u003cp\u003eMirror acrylic reflects like a normal mirror, surface and line engravings have a matt white appearance and a little bit of a 3D effect. All parts are firmly packed in a box and, if necessary, supported with wood. \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable data-mce-fragment=\"1\" width=\"100%\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e1.2 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u0026lt;15%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eUV resistant\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eType acrylic\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eCast\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235358105698,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/acrylaat-spiegel-goud-265538.jpg?v=1658694469"},{"product_id":"acrylaat-spiegel-zilver","title":"Acrylic Mirror Silver","description":"\u003cp\u003eMirror acrylic (PMMA) has a mirrored surface on one side and reflects light just like a normal mirror. In addition, the material is lighter than a glass mirror, what the material a excellent replacement for a glass mirror.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eMirror acrylic Acrylic has many applications, mainly in decorative industries. Acrylic can be found in showcases, interior construction, displays, facade advertising, (name) signs and models. \u003c\/p\u003e  \u003cp\u003eBecause the material has a high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a replacement for glass. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are few restrictions when cutting acrylic. When using finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breaks. \u003cspan\u003eAcrylic is also relatively fragile in thin or long strips and is sensitive to warping due to the heat released during cutting, so take this into account in your design.\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAcrylic mirror has a protective film on the front, which means the mirror is fully protected before, during and after cutting. The cut is tight, clean and the same colour as the material. Engraving areas have a slightly whiter colour compared to the material. \u003c\/p\u003e  \u003cp\u003eIf there are line or surface engravings in the design, the complete design will be cut and engraved in mirror image on the back (the design does not need to be printed for this). to be put in mirror image, we do this). Engravings are done as standard on the back of the mirror in mirror image to prevent reflection of the engraving. Engraving on the front is also possible, this gives a small 3D effect because the engraving is also reflected. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 250x130cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003eDouble-sided adhesive foil\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn principle Acrylic does not require post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded or milled afterwards and bent. With every operation it is important to take into account that the cutting process puts pressure on the cutting edge, if the acrylic is then processed then in some cases small cracks can occur. \u003c\/p\u003e  \u003cp\u003eTo give line and surface engravings a greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe material always has a protective film on the front, the back lacks a protective film. Engraving lines and surfaces are engraved from the back (in the mirror layer). The material is scratch-sensitive without a protective film.\u003c\/p\u003e  \u003cp\u003eMirror acrylic reflects like a normal mirror, surface and line engravings have a matt white appearance and a little bit of a 3D effect. All parts are firmly packed in a box and, if necessary, supported with wood. \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable data-mce-fragment=\"1\" width=\"100%\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e1.2 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u0026lt;15%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eUV resistant\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eType acrylic\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eCast\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":49444506665307,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/acrylaat-spiegel-zilver-721925.jpg?v=1658694471"},{"product_id":"acrylaat-licht-opaal","title":"Light opal Acrylic (Translucent)","description":"\u003cp\u003eLight opal acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, translucent plastic. The material is UV resistant and suitable for both indoor and outdoor use. The material is not transparent, but allows enough light to pass through that the shapes of objects are visible. Light opal Acrylic is also known as privacy acrylic. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eLight opal acrylic has many applications, mainly in decorative industries. Tinted acrylic can be found in showcases, interior construction, displays, facade advertising, (name) signs and models. \u003c\/p\u003e  \u003cp\u003eBecause the material has a high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a replacement for glass. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are few restrictions when cutting acrylic. When using finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breaks. \u003cspan\u003eAcrylic is also relatively fragile in thin or long strips and is sensitive to warping due to the heat released during cutting, so take this into account in your design.\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAcrylic has protective film on both sides, which means the plates are fully protected before, during and after cutting. The cut is tight, clean and the same colour as the material. Engraving areas have a slightly whiter colour compared to the material. \u003c\/p\u003e  \u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the foil on both sides. If there are engraving areas in the design, we must remove the foil from the top, in some cases a small amount of smoke can then affect the material. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn principle Acrylic does not require post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded or milled afterwards and bent. With every operation it is important to take into account that the cutting process puts pressure on the cutting edge, if the acrylic is then processed then in some cases small cracks can occur. \u003c\/p\u003e  \u003cp\u003eTo give line and surface engravings a greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eDepending on whether there are engraving areas in the design\u003c\/span\u003e does the material have protective film on both the front and back or only the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e  \u003cp\u003eLight opal acrylic has a light surface gloss and is translucent. Flat engravings have a matt white appearance, engraving lines are clearly visible from close up. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e1.2 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u0026lt;15%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eUV resistant\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eType acrylic\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eCast\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235382321250,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/licht-opaal-acrylaat-translucent-216579.jpg?v=1658954140"},{"product_id":"kurk","title":"Cork","description":"\u003ctc\u003eCork is a porous, light and elastic material. In addition to the fact that cork can be compressed up to 30% of its original volume, the material is also antistatic and moisture and fire resistant.\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause cork consists largely of air, it is an ideal material for heat and sound insulation. Furthermore, the material is also extremely suitable for use as a base material for noticeboards, decoration, coasters and waterproof closures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDuring cutting, considerable soot deposits are created on the cutting edge. Line and surface engravings have minimal deposits. Protective film on the front prevents residue around cutting edges and surface engravings, on the back, protective film prevents kickback from the cutting bed (black spots).\u003c\/p\u003e\u003ctable width=\"100%\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCutting width\u003c\/td\u003e\u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eSmallest shape supplied\u003c\/td\u003e\u003ctd\u003e6x6mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e\u003ctd\u003e1x1mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eAdditional options\u003c\/td\u003e\u003ctd\u003eDouble-sided adhesive film, protective film front\/back\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaximum size\u003c\/td\u003e\u003ctd\u003e90x60cm\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eCork can be processed afterwards by sawing, drilling, cutting and gluing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe cutting lines have a stop on the top, bottom and edge. Engraving surfaces and cutting lines are black with minimal stop on the material.\u003c\/span\u003e All parts are securely packed in a box to minimize risk of damage.\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\u003ctbody data-mce-fragment=\"1\"\u003e\u003ctr data-mce-fragment=\"1\"\u003e\u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\u003c\/tr\u003e\u003ctr data-mce-fragment=\"1\"\u003e\u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e\u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003e0.25 gram\/cm3\u003c\/td\u003e\u003c\/tr\u003e\u003ctr data-mce-fragment=\"1\"\u003e\u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e\u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003e\u0026lt;10%\u003c\/td\u003e\u003c\/tr\u003e\u003ctr data-mce-fragment=\"1\"\u003e\u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003eSuitable for outdoor use\u003c\/td\u003e\u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003c\/tc\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235604422754,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/Kurk.png?v=1658662429"},{"product_id":"golfkarton-3-mm","title":"\u003ctc\u003eCorrugated cardboard\u003c\/tc\u003e","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAvailable sizes:\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e-3mm B wave (single) 750mmx1150mm | €1.21 incl. VAT per sheet\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e-7mm BC wave (double) 750mmx1150mm | €4.16 incl. VAT per sheet\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eCorrugated cardboard is a material that is made up of thin cardboard sheets with a ribbed structure in between. Because the material actually consists of only a few thin sheets, cardboard can be cut very quickly by the laser cutter, which makes the cutting costs relatively low.\u003c\/p\u003e  \u003cp\u003eWe have 2 different types of corrugated cardboard, 3mm B corrugated cardboard (single wall) and 7mm BC corrugated cardboard (double wall). With the 3mm corrugated cardboard sheets, the opening of the channels is on the short side of the sheet. With the BC corrugated cardboard, this is on the long side. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eCorrugated cardboard is a construction material that is often found in displays, promotional items, packaging and 3D models. A big advantage of cardboard is that it can easily be printed beforehand or afterwards.\u003c\/p\u003e  \u003cp\u003eBecause the material and processing are relatively cheap compared to other materials, it is often used for prototypes. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eCorrugated cardboard is most suitable for cutting, line engravings are also possible, but due to the strength of the Laser cutters can still allow the engraving lines to penetrate the material a little bit in some cases.\u003c\/p\u003e  \u003cp\u003eFlat engraving is possible, but not recommended due to the wavy core. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eCorrugated cardboard is cut very quickly, so very little soot remains on the cut. The edges can be wiped with a dry cloth. Protective film cannot be applied to cardboard. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm \u003cspan\u003e(\u003c\/span\u003e\u003cspan\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e1150x750mm\u003cbr\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003eNo\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eCorrugated cardboard does not need to be post-processed in principle, if necessary the small amount of soot on the cutting edge can be removed with a dry cloth or air pressure. The material is suitable for subsequent painting, printing or gluing with wood glue or all-purpose glue.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan style=\"box-sizing: border-box;\" data-sheets-userformat='{\"2\":14780,\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":3,\"14\":[null,2,0],\"15\":\"Calibri\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"\u0026gt; Verkrijgbaar in verschillende afmetingen: 900x600mm, 600x600mm, 600x300mm, 900x300mm, 300x300mm\\n\u0026gt; Sterk, buigzaam materiaal met een hoge slijtvastheid.\\n\u0026gt; Gladde afwerking, splintert niet\\n\u0026gt; Overschilderbaar, er wordt aangeraden dit in meerdere lagen te doen.\"}'\u003eThe plates are brown and have a smooth surface, in some cases the ribs are slightly visible. Due to the internal tension the plates can be slightly warped. \u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"box-sizing: border-box;\" data-sheets-userformat='{\"2\":14780,\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":3,\"14\":[null,2,0],\"15\":\"Calibri\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"\u0026gt; Verkrijgbaar in verschillende afmetingen: 900x600mm, 600x600mm, 600x300mm, 900x300mm, 300x300mm\\n\u0026gt; Sterk, buigzaam materiaal met een hoge slijtvastheid.\\n\u0026gt; Gladde afwerking, splintert niet\\n\u0026gt; Overschilderbaar, er wordt aangeraden dit in meerdere lagen te doen.\"}'\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003e  \u003cspan\u003e\u003cstrong\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eDensity\u003c\/td\u003e  \u003ctd\u003e0.2 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eThickness tolerance\u003c\/td\u003e  \u003ctd\u003e\u0026lt;15%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eUV resistant\u003c\/td\u003e  \u003ctd\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"B-type (single) 3mm","offer_id":50165664219483,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"BC-type (double) 7mm","offer_id":50165664252251,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/golfkarton-972334.png?v=1742683472"},{"product_id":"kraftplex","title":"\u003ctc\u003eKraftplex\u003c\/tc\u003e","description":"\u003cp\u003e\u003cspan\u003eKraftplex is a material made from 100% compressed wood fibers and is therefore completely biodegradable. This thin, ecological and flexible material is almost indestructible.\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cb\u003eApplications\u003c\/b\u003e\u003c\/p\u003e  \u003cp\u003eDue to the thickness and The composition of Kraftplex allows the material to be cut with great precision. The material is often found in model making, small packaging, business cards and stencils and templates. \u003c\/p\u003e  \u003cp\u003e\u003cb\u003eLaser cutting\u003c\/b\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eLaser cutting creates discoloured edges, this is unavoidable. This discolouration is dark brown to black. Flat engravings are also dark brown. \u003c\/span\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e56x34cm (up to 80x50cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003eDouble-sided adhesive film, protective film top\/bottom\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cb\u003eAppearance\u003c\/b\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eThe material has a warm brownish colour that is reminiscent of MDF but is smoother than MDF. On the outside of the Kraftplex a subtle geometric pattern is palpable\/visible that gives the material a very unique character. The material has no grain direction. Kraftplex can be per sheet An have different shades of brown.\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003e  \u003cspan\u003e\u003cstrong\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eDensity\u003c\/td\u003e  \u003ctd\u003e1.2 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eThickness tolerance\u003c\/td\u003e  \u003ctd\u003e\u0026lt;10%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eUV resistant\u003c\/td\u003e  \u003ctd\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235619037282,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/Kraftplex.png?v=1658662390"},{"product_id":"berken-multiplex","title":"Birch plywood","description":"\u003cp\u003eBirch plywood is an all-round sheet material that is built up from thin layers of birch veneer. The material is sturdy and light in color. We supply B\/BB quality plywood, which means that the front can contain small plugs and knots and the back can contain slightly larger plugs and knots. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eBirch plywood is one of our most popular materials because it is strong and sturdy. The material is often found in packaging, housings, scale models, (name) signs, prototypes, jewelry and furniture and interior construction.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003ePay attention to the thickness tolerance when designing finger and lock joints. Birch plywood has a grain direction and this is generally horizontal for a full panel, but can also be vertical depending on how the panel is sawn. If the grain direction is important, this should be indicated in advance.\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe cutting edges of birch plywood turn brown\/black. There will be smoke deposits around the cut on the top and bottom of the material, \u003cspan\u003ethis can largely prevented by protective film. Any smoke residue that is still on the material can easily be removed with sandpaper. \u003c\/span\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd style=\"width: 42.3689%;\"\u003eCutting width\u003c\/td\u003e  \u003ctd style=\"width: 54.8221%;\"\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 42.3689%;\"\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd style=\"width: 54.8221%;\"\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 42.3689%;\"\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd style=\"width: 54.8221%;\"\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 42.3689%;\"\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 54.8221%;\"\u003e120x60cm (up to 153x130cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 42.3689%;\"\u003eAdditional options\u003c\/td\u003e  \u003ctd style=\"width: 54.8221%;\"\u003e\u003cspan\u003eDouble-sided adhesive film, protective film top\/bottom\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003ePost-processing of birch plywood is not necessary, if necessary the sheet material can still be sent with sandpaper grit 400 for a smooth finish. Birch plywood can be painted, glued, sawn, drilled and sanded, both afterwards or beforehand. \u003c\/p\u003e  \u003cul\u003e\u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eBirch plywood is very light brown in colour, cutting edges and surface and line engravings are dark brown and (almost) do not transfer. Each plate is virtually flawless on the front, with some more brushes and blobs on the back. \u003c\/span\u003e\u003cspan\u003eDue to the production process, the density may vary slightly. \u003c\/span\u003e\u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 37.7903%;\" data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 59.4007%;\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 37.7903%;\" data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd style=\"width: 59.4007%;\" data-mce-fragment=\"1\"\u003e0.75 gram\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 37.7903%;\" data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd style=\"width: 59.4007%;\" data-mce-fragment=\"1\"\u003e\u0026lt;10%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 37.7903%;\" data-mce-fragment=\"1\"\u003eSuitable for outdoor use\u003c\/td\u003e  \u003ctd style=\"width: 59.4007%;\" data-mce-fragment=\"1\"\u003eYes, if treated correctly\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235623100514,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/multiplex-berken-775347.jpg?v=1658954136"},{"product_id":"zwart-mdf","title":"MDF Black","description":"\u003cp\u003eBlack MDF is a variant of regular MDF where black dye is added to the material during the production process, which makes the material black through and through. A major advantage of black MDF is that the cutting lines have the same color as the material. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003eThe applications of black MDF are almost the same as regular MDF, mostly constructive purposes such as furniture construction, interior construction and model construction. In addition, the material is very popular for its aesthetic properties and combines well with acrylic. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eLike other types of wood, black MDF will have smoke deposits on the top and bottom of the material around the cut and engravings after laser cutting, these smoke deposits are virtually invisible due to the colour of the material. The cut and engraving have the same color as the material.\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 250x130cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003eDouble-sided adhesive film, protective film front\/back\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eMDF can easily be mechanically processed afterwards by sawing, drilling, milling and sanding. The material can also be painted, when applying paint it is important to take into account the moisture absorbing properties of MDF, multiple base coats are often necessary.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eMDF is black through and through, has a smooth surface and does not splinter. The material absorbs water very easily and is therefore not suitable for humid environments. \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 40.1475%;\" data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 57.0435%;\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 40.1475%;\" data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd style=\"width: 57.0435%;\" data-mce-fragment=\"1\"\u003e0.7 gram\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 40.1475%;\" data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd style=\"width: 57.0435%;\" data-mce-fragment=\"1\"\u003e\u0026lt;10%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 40.1475%;\" data-mce-fragment=\"1\"\u003eSuitable for outdoor use\u003c\/td\u003e  \u003ctd style=\"width: 57.0435%;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cbr\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235626901602,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/MDF_zwart.png?v=1658661101"},{"product_id":"hardboard","title":"Hardboard","description":"\u003cp\u003eHardboard, also known as high-density fiberboard (HDF), is a hard, thin board made by pressing wood fibers together under high pressure. This process gives this material a relatively high density. Hardboard is recognizable by its brown color and high density.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eBecause the sheets are thin and relatively cheap, hardboard is suitable for prototypes, covering, packaging, furniture construction, hobby projects and protection.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eDue to the production process, the material retains a black coating on and around the edge. The coating hardly gives off. Protective film reduces the coating on the surface of the material\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 244x122cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003eProtective film, double-sided adhesive film. \u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eHardboard can easily be mechanically processed afterwards by sawing, drilling, milling and sanding. The material can also be painted, when applying paint it is important to take into account the moisture absorbing properties, multiple base coats are often necessary.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eHardboard is brown in colour, both sides have a smooth surface and do not splinter. The material absorbs water very easily and is therefore not suitable for humid environments. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd style=\"width: 45.7842%;\"\u003e  \u003cspan\u003e\u003cstrong\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 49.2158%;\"\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 45.7842%;\"\u003eDensity\u003c\/td\u003e  \u003ctd style=\"width: 49.2158%;\"\u003e0.9 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 45.7842%;\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd style=\"width: 49.2158%;\"\u003e\u0026lt;10%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 45.7842%;\"\u003eUV resistant\u003c\/td\u003e  \u003ctd style=\"width: 49.2158%;\"\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 45.7842%;\"\u003eOther\u003c\/td\u003e  \u003ctd style=\"width: 49.2158%;\"\u003eNot suitable for humid applications\u003cbr\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003e\u003cb\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235637452898,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/Hardboard.png?v=1658662337"},{"product_id":"laser-rubber","title":"Laser rubber gray","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAvailable size: A4 (210x297mm) | €13.00 incl. VAT per sheet \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eLaser rubber is a gray rubber specially developed for laser cutting. The material is stretchable and flexible and can be laser cut and engraved very precisely.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eLaser rubber is very suitable for making stamps, bumpers and (waterproof) seals.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesigns\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eWhen designing stamps it is important that the design is made in negative, as the parts that need to be stamped should not be removed. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eLaser rubber does not retain any residue after cutting, although in some cases a little dust may remain in the engravings. Laser rubber can be processed with very high precision be engraved. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e297x210mm\u003cbr\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003eNo\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThis material can be cut with a sharp knife and bonded with a suitable contact adhesive.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eLaser rubber is dark gray in color, engraved parts are light gray. Dust from the production process can remain on the material (mainly in the engravings). This can easily be removed with a wet brush. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003e  \u003cspan\u003e\u003cstrong\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eDensity\u003c\/td\u003e  \u003ctd\u003e1.2 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eThickness tolerance\u003c\/td\u003e  \u003ctd\u003e\u0026lt;10%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eUV resistant\u003c\/td\u003e  \u003ctd\u003eYes\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235644891234,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/laserrubber.png?v=1658662439"},{"product_id":"pe-hardschuim","title":"PE hard foam","description":"\u003cp\u003ePolyethylene (PE) foam is a material consisting of closed air cells. This ensures that the material offers excellent protection. The foam is about as hard as packaging foam, we also supply a softer variant (soft foam). \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe application area of ​​PE foam is mainly suitcase inlays and to protect objects. In addition, the material is also very suitable for logos, wall ornaments and layered sculptures. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eFoam has a relatively large cut, as a rule of thumb the thicker the material the wider the cut. \u003cspan data-mce-fragment=\"1\"\u003eFlat engraving is possible and is relatively deep (1-2 millimeters)\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe material retains a clean cut without tarnishing after laser cutting. The cut looks about the same as the material itself but the cut is slightly slanted. The foam is a bit elastic, we try to load the material into the laser as carefully as possible without tension, but it is possible that a part that is \u0026quot;relaxed\u0026quot; deviates a little from the actual size. \u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eProtective film and double-sided adhesive film are not possible. Cut parts may have a little black backlash from the laser bed on the underside of the material. \u003c\/span\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd style=\"width: 48.6213%;\" data-mce-style=\"width: 48.6213%;\"\u003eCutting width\u003c\/td\u003e  \u003ctd style=\"width: 48.5698%;\" data-mce-style=\"width: 48.5698%;\"\u003e0.6mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.3mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 48.6213%;\" data-mce-style=\"width: 48.6213%;\"\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd style=\"width: 48.5698%;\" data-mce-style=\"width: 48.5698%;\"\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 48.6213%;\" data-mce-style=\"width: 48.6213%;\"\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 48.5698%;\" data-mce-style=\"width: 48.5698%;\"\u003e120x60cm (up to 200x120cm on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAfter laser cutting, PE foam can be processed with a knife or hot knife. The foam can also be painted or glued with spray adhesive or contact adhesive.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eHard foam feels soft (for comparison, as soft as mattress foam) and is light gray in color. The cut is colorless and feels the same as unprocessed material. \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 42.4719%;\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 54.7191%;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 42.4719%;\"\u003eDensity\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 54.7191%;\"\u003e0.029 gram\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 42.4719%;\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 54.7191%;\"\u003e\u0026lt;20%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 42.4719%;\"\u003eSuitable for outdoor use\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 54.7191%;\"\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235648987234,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/pe-hardschuim-856895.jpg?v=1658694470"},{"product_id":"pe-zachtschuim","title":"PE Soft foam","description":"\u003cp\u003ePolyethylene (PE) soft foam is a material that consists of closed cells of air. This property ensures that the material offers excellent protection. This foam is about as hard as mattress foam, we also have a harder variant (hard foam). \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003eThe application area of ​​PE foam is mainly suitcase inlays and to protect objects. In addition, the material is also very suitable for logos, wall ornaments and layered sculptures. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eFoam has a relatively large cut, as a rule of thumb the thicker the material the wider the cut. Surface engraving is possible and is relatively deep (1-2 millimeters).\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe material retains a clean cut without tarnishing after laser cutting. The cut looks about the same as the material itself but the cut is slightly slanted. The foam is a bit elastic, we try to load the material into the laser as carefully as possible without tension, but it is possible that a part that is \u0026quot;relaxed\u0026quot; deviates a little from the actual size. \u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eProtective film and double-sided adhesive film are not possible. Cut parts may have a little black backlash from the laser bed on the underside of the material. \u003c\/span\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd style=\"width: 48.6213%;\"\u003eCutting width\u003c\/td\u003e  \u003ctd style=\"width: 48.5698%;\"\u003e0.6mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.3mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 48.6213%;\"\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd style=\"width: 48.5698%;\"\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 48.6213%;\"\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 48.5698%;\"\u003e120x60cm (up to 200x120cm on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSoft foam can be processed with a knife or hot knife after laser cutting. The foam can also be painted or glued with spray adhesive or contact adhesive.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSoft foam feels soft (for comparison, as soft as mattress foam) and is dark gray\/black in color. The cut is colorless and feels the same as unprocessed material. The cuts can be a bit sticky due to melting of the material. \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003e0.02 gram\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003e\u0026lt;20%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003eSuitable for outdoor use\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/p\u003e  \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235654262882,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/PE_zachtschuim.png?v=1747852838"},{"product_id":"bamboe-caramel-sidepressed","title":"Bamboo Caramel Sidepressed","description":"\u003cp\u003eBamboo is a solid wood type with a characteristic appearance. The material consists of cross-glued strips, which means that there are hardly any knots visible in the material. The board looks the same from both sides and is very strong in the length with the grain, but less strong crosswise. The pressing of the board is sidepressed. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eBamboo is often found in components that are often visible, such as housings, cover plates, decorative elements, furniture and interior construction, and works of art.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003ePay attention to thickness tolerance when designing finger and lock connections. Solid bamboo has a grain direction and this is generally horizontal for a full panel, but can also vertically depend on how the panel is sawn. If the grain direction is important, this should be indicated in advance.\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eThe cutting edges of bamboo will turn black. There will be smoke residue around the cut on the top and bottom of the material, this can largely prevented by protective film. Any smoke residue that is still on the material can easily be removed with sandpaper. \u003c\/span\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 244x122cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003eDouble-sided adhesive film, protective film front\/back\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003ePost-processing of Bamboo is not necessary, but can optionally be sent with 400 grit sandpaper for a smooth finish. Bamboo can be painted, glued, sawn, milled, drilled and sanded, either afterwards or beforehand. \u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eBamboo is very light brown in colour with a clear grain direction. Cutting edges and surface and line engravings are dark brown and (almost) do not transfer. Each plate is virtually flawless on both sides. \u003cspan\u003eDue to the nature of the material, the density may vary slightly. \u003c\/span\u003e\u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable data-mce-fragment=\"1\" width=\"100%\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 47.823%;\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 49.368%;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 47.823%;\"\u003eDensity\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 49.368%;\"\u003e0.7 gram\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 47.823%;\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 49.368%;\"\u003e\u0026lt;10%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 47.823%;\"\u003eSuitable for outdoor use\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 49.368%;\"\u003eYes, if treated correctly\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cbr\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31241332850821,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/Bamboe.png?v=1658662256"},{"product_id":"polyacetaal-1","title":"Polyacetaal (Delrin) (POM)","description":"\u003cp\u003ePolyacetal, also known as Polyoxymethylene, POM and under the brand name Delrin is a hard plastic with a milky white appearance. The plastic is very popular in the industrial sector because it is wear-resistant and has a low coefficient of friction. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe field of application of polyacetal is quite specific, the material is mainly found in (small) mechanical engineering, installation construction and other low-load industrial fields. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn general, this material is only cut, because line and surface engravings are almost invisible. Due to the production process, the material may warp slightly. This is also the case with thin or long strips.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe cut is tight, clean and the same color as the material. Engraving areas and lines have the same color as the material. Around the cut there is smoke deposit and a very small melting edge, this can be prevented on both sides with protective foil. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eDue to the chemical structure of polyacetal, almost all adhesives do not adhere to the material. Fastening is almost only possible with bolts and screws. However, the material can be sawn, sanded, milled and drilled to perfection.\u003c\/p\u003e  \u003cp\u003eTo give line and surface engravings a greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eThe material is opal in nature, the thinner variants more so than the thicker ones. Engraving areas and lines are almost invisible and there may be small scratches on the material because the material is produced without protective film. Without protective film there is a grainy amount of smoke buildup on the top and bottom.\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" style=\"width: 530px;\"\u003e  \u003ccolgroup\u003e  \u003ccol width=\"64\"\u003e  \u003ccol width=\"83\"\u003e  \u003ccol width=\"41\"\u003e  \u003ccol width=\"99\"\u003e  \u003c\/colgroup\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Dichtheid\"}' style=\"width: 69px;\"\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Diktetolerantie\"}' style=\"width: 105px;\"\u003e\u003cstrong\u003eThickness tolerance\u003c\/strong\u003e\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Geschikt voor buitenshuis gebruik\"}' style=\"width: 113px;\"\u003e\u003cstrong\u003eSuitable for outdoor use\u003c\/strong\u003e\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snedebreedte\"}' style=\"width: 106px;\"\u003e\u003cstrong\u003eCutting width\u003c\/strong\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"1.2\"}' style=\"width: 69px;\"\u003e1.2 g\/cm\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"\u0026lt;0.1mm\"}' style=\"width: 105px;\"\u003e\u0026lt;15%\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"Ja\"}' style=\"width: 113px;\"\u003eYes, limited\u003c\/td\u003e  \u003ctd data-sheets-value='{\"1\":2,\"2\":\"0.2 mm\"}' style=\"width: 106px;\"\u003e0.2 mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31241505407109,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/polyacetaaldelrin-823520.jpg?v=1658954199"},{"product_id":"eva-schuim","title":"Eva foam","description":"\u003cp\u003eEthylene vinyl acetate (EVA) foam is a material with a relatively high density. In contrast to other types of foam, the air cells are not or hardly visible in the material and it feels almost rubbery. This foam also does not absorb water and is UV resistant. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe field of application of EVA foam is diverse. Because the material can be processed in many ways, the material is often found in the production of costumes and props. The material can also be used in the form of floor tiles for protection and soundproofing or even as wall decoration. Finally, the material can be found in \u0026quot;rough\u0026quot; model building and models as a base, for example. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eFoam has a relatively large cut, as a rule of thumb the thicker the material the wider the cut. Small details (less than 5mm) should be avoided for this reason. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe material retains a clean cut without tarnishing after laser cutting, the cut is slightly darker than the material. The foam is a bit stretchy, we try to load the material into the laser as carefully as possible without tension, but it may be that a part that is \u0026quot;relaxed\u0026quot; deviates a little from the actual size. Engravings are relatively deep and feel hard, as if the material is melted. \u003c\/p\u003e  \u003cp\u003eDouble-sided adhesive foil is not possible. Cut parts can have \u0026quot;pits\u0026quot; and black backlash from the laser bed on the underside of the material, this can be prevented by protective foil. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd style=\"width: 48.6213%;\" data-mce-style=\"width: 48.6213%;\"\u003eCutting width\u003c\/td\u003e  \u003ctd style=\"width: 48.5698%;\" data-mce-style=\"width: 48.5698%;\"\u003e0.6mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.3mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 48.6213%;\" data-mce-style=\"width: 48.6213%;\"\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd style=\"width: 48.5698%;\" data-mce-style=\"width: 48.5698%;\"\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd style=\"width: 48.6213%;\" data-mce-style=\"width: 48.6213%;\"\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 48.5698%;\" data-mce-style=\"width: 48.5698%;\"\u003e120x60cm (up to 200x120cm on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eEVA foam can be processed with a knife, dremel or hot knife after laser cutting. The foam can also be painted, sanded, shaped or glued with contact adhesive.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eEVA feels soft (for comparison, as soft as a yoga mat) and is white in color. The cut is slightly darker than the material. The material can be easily bent. The color of EVA foam is white-gray. \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 42.4719%;\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 54.7191%;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 42.4719%;\"\u003eDensity\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 54.7191%;\"\u003e0.1 gram\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 42.4719%;\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 54.7191%;\"\u003e\u0026lt;20%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 42.4719%;\"\u003eSuitable for outdoor use\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-fragment=\"1\" data-mce-style=\"width: 54.7191%;\"\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31635740688517,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/EVA_schuim.png?v=1658662284"},{"product_id":"silicone-rubber-rood","title":"Silicone rubber red (food safe)","description":"\u003cdiv id=\"materialLoad\"\u003e\u003c\/div\u003e  \u003cp\u003e\u003cscript\u003e\nvar material = \"Silicone rubber rood (voedsel veilig)\"\nfetch(\"https:\/\/api.app.laserlokaal.nl\/materialVisualizer\/\"+material).then(function(response) {\n    return response.text();\n}).then(function(string) {\n    document.getElementById(\"materialLoad\").innerHTML = string;\n    console.log(string);\n});\n\u003c\/script\u003eSilicone rubber is a type of rubber that can be cut well and remains elastic and flexible. The material can be cut very precisely. This variant is food safe. The material is resistant to temperatures up to 220 degrees, water-repellent, insulating and UV-resistant.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSilicone rubber is often found in the f\u003cspan\u003epharmaceutical, medical and food industries in the form of closures, (baking) moulds and applications where elasticity is important. \u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesigns\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are no restrictions in design, the material can be \u003cspan\u003every high precision be engraved. Engravings have little contrast but can be used for negatives in baking molds, for example. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSilicone rubber does not retain a permanent deposit after cutting, but it does leave a dusty\/ashy residue that can be washed off. Because the material is flexible, the dimensions of certain parts can vary a small amount differences in reality  t.o.v. the design.\u003cbr\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 250x120cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThis material can be cut with a sharp knife. The material should be washed thoroughly after processing if the application is food.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSilicone rubber is red in color, engraved parts have the same color as the material. On the material (mainly in the engravings and cut) residue can remain from the production process. This can easily be removed with alcohol or a round in the washing machine. \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e1.25 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u0026lt;15%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eUV resistant\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31639095279749,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/silicone-rubber-rood-voedsel-veilig-566322.jpg?v=1658694471"},{"product_id":"silicone-rubber-transparant","title":"Silicone rubber Translucent","description":"\u003cp\u003eSilicone rubber is a type of rubber that can be cut well and remains elastic and flexible. The material can be cut very precisely. The material is resistant to temperatures up to 220 degrees, water-repellent, insulating and UV-resistant.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e  \u003cp\u003eSilicone rubber is often found in the f\u003cspan\u003epharmaceutical, medical and food industries. Mainly in applications where elasticity is important. \u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesigns\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are no restrictions in design, the material can be \u003cspan\u003every high precision be engraved.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSilicone rubber does not retain a deposit after cutting, although and in some cases a little residue may remain along the edge and in the engravings. Because the material is flexible, the dimensions of certain parts can vary slightly differences in reality  t.o.v. the design.  Engravings have little contrast.\u003cbr\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 250x120cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThis material can be cut with a sharp knife.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSilicone rubber is milky white in color, engraved parts have the same color as the material. On the material (mainly in the engravings and cut) residue can remain from the production process. This can easily be removed with alcohol or a round in the washing machine. \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e1.25 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u0026lt;15%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eUV resistant\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31640208310405,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/silicone-rubber-translucent-769755.jpg?v=1658954199"},{"product_id":"okoume-multiplex-watervast","title":"Okoumé plywood (waterproof)","description":"Okoumé plywood is a structural sheet material composed of thin layers of Okoumé veneer. The material is sturdy and relatively dark in color. On the front side of the material, plugs and knots may occur, while on the back side, the transition between different veneer layers may be visible. We place the most attractive side facing up in the machine\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOkoumé plywood is a good alternative to birch plywood because the material has waterproof properties without finishing. When the material is additionally protected with a paint or stain layer, it is suitable for permanent outdoor use. Therefore, the material is often found in moist or exterior applications such as (wall) signs, cladding, and furniture construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePay attention to the thickness tolerance when designing finger and slot joints. Okoumé plywood has a grain direction, which is generally horizontal on a full sheet, but can also be vertical depending on how the sheet is cut. If the grain direction is important, it should be specified in advance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut edges of Okoumé plywood turn brown\/black. On the top and bottom sides of the material, there will be smoke residue around the cut, \u003cspan\u003ethis can  largely be prevented by using protective film. Any remaining smoke residue on the material can be easily removed with sandpaper. \u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Width\u003c\/td\u003e\n\u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Included Shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Detail (engraving)\u003c\/td\u003e\n\u003ctd\u003e1x1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Options\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eDouble-sided adhesive film, protective film front\/back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (on request up to 122x244cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePost-processing of Okoumé plywood is not necessary, but recommended. The material can be sent with sandpaper grit 400 for a smooth finish. The material can be painted, glued, sawn, drilled, and sanded, either afterwards or beforehand. \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOkoumé plywood is reddish-brown in color, cut edges and surface and line engravings are dark brown and (almost) do not rub off. The material is of a constructive nature and for this reason, the front side may have some knots and plugs, and on the back side, the transition between different sheets may be visible. \u003c\/span\u003e\u003cspan\u003eDue to the production process, the density may vary slightly. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable data-mce-fragment=\"1\" width=\"100%\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\"\u003eDensity\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\"\u003e0.5 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\"\u003eThickness Tolerance\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\"\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\"\u003eSuitable for Outdoor Use\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\"\u003eYes, if treated afterwards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery Time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31648272187525,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/Okoume.png?v=1658661293"},{"product_id":"vibers-bioplastic","title":"Fibernyl bioplastic","description":"\u003cp\u003eFibernyl (Vibers) bioplastic is made from Elephant grass (Miscanthus Giganteus), PLA and starch from a waste stream of the Dutch potato industry. Elephant grass is a very sustainable crop that grows in the Netherlands, captures 4x more CO2 than trees and does not require irrigation, fertilizers or pesticides. Advantages of Fibernyl bioplastic include: low CO2 footprint, biobased, biodegradable, natural look \u0026amp; feel. The material is designed and produced in the Netherlands and available in 3 colors: white, black and brown (natural). \u003c\/p\u003e  \u003cp\u003e\u003cb\u003eApplications\u003c\/b\u003e\u003c\/p\u003e  \u003cp\u003eFibernyl bioplastic is an excellent decorative replacement for regular plywood. The material can be found in luxury packaging, POS materials and displays, signage, interior applications and labels. \u003c\/p\u003e  \u003cp\u003e\u003cb\u003eLaser cutting\u003c\/b\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eThe material cuts like regular plastic, the cut is clean and tight. This also applies to surface engravings. The cutting process can cause deposits on the underside of the material, this can be prevented with protective film. Residue on the top is mainly caused by surface engravings, but cutting and engraving lines also contribute to this, residue on the top of the material can be prevented by protective film on the top. The yellow residue is most visible in the white variant and can be removed by sanding. \u003c\/span\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e100x60cm (up to 200x120cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003eDouble-sided adhesive film, protective film top\/bottom\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cb\u003eAppearance\u003c\/b\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eThe material is basically a light brownish color with clear fibers and may differ slightly in color than indicated in the photo, this has to do with the production process of the material. In addition, post-processed colors black and white are available, both of which are colored through and through. \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eThe material is slightly rough on one side and smooth on the bottom. The material is flexible and feels like flexible plastic. \u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003e  \u003cspan\u003e\u003cstrong\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eDensity\u003c\/td\u003e  \u003ctd\u003e1.3 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eThickness tolerance\u003c\/td\u003e  \u003ctd\u003e\u0026lt;20%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eUV resistant\u003c\/td\u003e  \u003ctd\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Brown","offer_id":50173791371611,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":50173791404379,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":50173791437147,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/Vibers.png?v=1742657579"},{"product_id":"massief-karton-grijs","title":"Solid cardboard gray","description":"\u003cp\u003e Solid board is a material that is made up of compressed paper fibres. This type is made with 100% recycled fibres.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSolid board is a construction material that is often found in displays, promotional items, packaging, cardboard and 3D models.\u003c\/p\u003e  \u003cp\u003eBecause the material and processing are relatively cheap compared to other materials, it is often used for prototypes. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are few restrictions when designing with greyboard. Due to the fibrous nature of the material, small parts can tear or break. It is therefore advisable to avoid long or thin parts as much as possible. Flat engraving is possible, but this produces a large amount of black residue. This can be prevented for protective film on the front of the material. \u003cspan data-mce-fragment=\"1\"\u003eWithout a protective film on the bottom, the material on the bottom may get a little black backlash from the laser bed. \u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSolid cardboard can be cut relatively quickly. A black residue remains on the cut that gives off, this can be removed with a dry cloth. \u003c\/p\u003e  \u003cp\u003eEngraving lines and surfaces are dark brown to black and give off a little bit. Protective film reduces the smoke of surface engraving. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003eDouble-sided adhesive film, protective film front\/back\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 120x80cm on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAfter laser cutting, solid board can be taken off to remove loose residue. The material can be processed with a knife or scissors or with all-purpose glue or wood glue glued. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"\u0026gt; Verkrijgbaar in verschillende afmetingen: 900x600mm, 600x600mm, 600x300mm, 900x300mm, 300x300mm\\n\u0026gt; Sterk, buigzaam materiaal met een hoge slijtvastheid.\\n\u0026gt; Gladde afwerking, splintert niet\\n\u0026gt; Overschilderbaar, er wordt aangeraden dit in meerdere lagen te doen.\"}' data-sheets-userformat='{\"2\":14780,\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":3,\"14\":[null,2,0],\"15\":\"Calibri\",\"16\":11}' style=\"box-sizing: border-box;\"\u003eThe plates are grey with a clear fiber structure and have a smooth surface. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003e~0.6gram\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003e\u0026lt;10%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\" data-mce-fragment=\"1\"\u003eSuitable for outdoor use\u003c\/td\u003e  \u003ctd style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31694461894789,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/massief-karton-grijs-625586.jpg?v=1658694537"},{"product_id":"acrylaat-melkwit","title":"\u003ctc\u003eAcrylic white translucent (light -permeable)\u003c\/tc\u003e","description":"\u003ctc\u003eTranslucent white acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, semi-transparent plastic. In normal light the material looks very much like regular acrylic, but when the plate is illuminated from behind (for example in a light box or logo) the light is diffused in the plate, the result is a soft spread of light. The material is UV resistant and suitable for both indoor and outdoor use. The plate has a transmission of ~32%.\u003cbr\u003e\u003cstrong\u003eApplications\n\u003c\/strong\u003e\n\u003cp\u003e\n  \u003cspan style=\"color: #000000;\"\u003e\n    \u003cspan style=\"background-color: #d5f3f8;\"\u003eTranslucent \u003c\/span\u003e\n  \u003c\/span\u003e\n  white Acrylic has many applications, mainly in decorative industries. Acrylic can be found in showcases, interior construction, displays, facade advertising, (name) signs. In combination with (different colors of) light, the material is very beautiful.\u003c\/p\u003e\n  \u003cp\u003eBecause the material has a high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a replacement for glass.\u003c\/p\u003e\n  \u003cp\u003e\n    \u003cstrong\u003eDesign considerations\u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003eThere are few restrictions when cutting acrylic. When using finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breaks. \u003cspan\u003eAcrylic is also relatively fragile in thin or long strips and is sensitive to warping due to the heat released during cutting, so take this into account in your design.\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eLaser cutting\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, which means the plates are fully protected before, during and after cutting. The cut is tight, clean and the same colour as the material. Engraving areas have a slightly whiter colour compared to the material.\u003c\/p\u003e\n\u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the foil on both sides. If there are engraving areas in the design, we must remove the foil from the top, in some cases a small amount of smoke can then affect the material.\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003ePost-processing\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eIn principle Acrylic does not require post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded or milled afterwards and bent. With every operation it is important to take into account that the cutting process puts pressure on the cutting edge, if the acrylic is then processed then in some cases small cracks can occur.\u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings a greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves.\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eAppearance\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cspan\u003eDepending on whether there are engraving areas in the design\u003c\/span\u003e\n  does the material have protective film on both the front and back or only the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e\n  \u003cp\u003eAcrylic has a light surface gloss, surface engravings have a matt white appearance. Engraving lines are clearly visible from close up. All parts are securely packed in a box and, if necessary, supported with wood.\u003c\/p\u003e\n  \u003cp data-mce-fragment=\"1\"\u003e\n    \u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003ctable data-mce-fragment=\"1\" width=\"100%\"\u003e\n    \u003ctbody data-mce-fragment=\"1\"\u003e\n      \u003ctr data-mce-fragment=\"1\"\u003e\n        \u003ctd data-mce-fragment=\"1\"\u003e\n          \u003cspan data-mce-fragment=\"1\"\u003e\n            \u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\n          \u003c\/span\u003e\n        \u003c\/td\u003e\n        \u003ctd data-mce-fragment=\"1\"\u003e\n          \u003cspan data-mce-fragment=\"1\"\u003e\n            \u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\n          \u003c\/span\u003e\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-mce-fragment=\"1\"\u003e\n        \u003ctd data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e\n        \u003ctd data-mce-fragment=\"1\"\u003e1.2 grams\/cm3\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-mce-fragment=\"1\"\u003e\n        \u003ctd data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e\n        \u003ctd data-mce-fragment=\"1\"\u003e\u0026lt;15%\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-mce-fragment=\"1\"\u003e\n        \u003ctd data-mce-fragment=\"1\"\u003eUV resistant\u003c\/td\u003e\n        \u003ctd data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-mce-fragment=\"1\"\u003e\n        \u003ctd data-mce-fragment=\"1\"\u003eType acrylic\u003c\/td\u003e\n        \u003ctd data-mce-fragment=\"1\"\u003eCast\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n  \u003cp data-mce-fragment=\"1\"\u003e\n    \u003cspan data-mce-fragment=\"1\"\u003e\n      \u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\n    \u003c\/span\u003e\n  \u003c\/p\u003e\n  \u003cbr\u003e\n    \u003cstyle type=\"text\/css\"\u003e\n      \u003c!--\n      td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n      --\u003e\n    \u003c\/style\u003e\n    \u003cstyle type=\"text\/css\"\u003e\n      \u003c!--\n      td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n      --\u003e\n    \u003c\/style\u003e\n    \u003cstyle type=\"text\/css\"\u003e\n      \u003c!--\n      td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n      --\u003e\n    \u003c\/style\u003e\n    \u003cstyle type=\"text\/css\"\u003e\n      \u003c!--\n      td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n      --\u003e\n    \u003c\/style\u003e\n    \u003cstyle type=\"text\/css\"\u003e\n      \u003c!--\n      td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n      --\u003e\n    \u003c\/style\u003e\n    \u003cstyle type=\"text\/css\"\u003e\n      \u003c!--\n      td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n      --\u003e\n    \u003c\/style\u003e\u003c\/tc\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31712431669381,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/melkwit-opaal-acrylaat-lichtdoorlatend-444043.jpg?v=1658954137"},{"product_id":"mylar-folie","title":"Mylar foil","description":"  Mylar foil is a very thin type of foil that can be used to make stencils for example. The foil is completely transparent.  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003eMylar foil is often used in model building, air brushing or wall painting. Use repositionable spray adhesive to make Mylar stencil material self-adhesive and secure.\u003cbr\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesigns\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe material is only suitable for cutting, (flat) engravings are not possible. Because the material is very thin, shapes can be cut out very precisely. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe cut is clean, tight and leaves no residue. Without protective film, the material on the underside may get a little black backlash from the laser bed. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003eDouble-sided adhesive film, protective film front\/back\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThis material can be cut or clipped with a sharp knife or scissors. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eMylar foil is a very thin flexible and transparent foil type with a light surface gloss. We advise against using the foil type outdoors for long periods of time. The foil \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable data-mce-fragment=\"1\" width=\"100%\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\"\u003eDensity\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\"\u003e1.34 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\"\u003e\u0026lt;10%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 42.4719%;\" data-mce-style=\"width: 42.4719%;\"\u003eSuitable for outdoor use\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\" style=\"width: 54.7191%;\" data-mce-style=\"width: 54.7191%;\"\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31771030061189,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/mylar-folie-954903.jpg?v=1658954136"},{"product_id":"acrylaat-satijn-transparant","title":"Acrylic matte transparent","description":"\u003cp\u003eTransparent satin acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, semi-transparent plastic. The material is provided with a finely matte surface on both sides. The matte surface feels and appears sandblasted, but the effect is achieved during the casting process and results in a less \"sharp\" structural form than sandblasted surfaces.\n\nApplications\n\nTransparent satin acrylic has many applications, mainly in decorative industries. This acrylic can be found in showcases, interior construction, displays, facade advertising, (name) signs, and models.\n\nVery beautiful to use with LED lighting, the translucent light is softly diffused.\n\nDesign considerations\n\nThere are few restrictions when cutting acrylic. For finger joints, it is important to consider the thickness tolerances of acrylic to prevent internal stresses and thus cracking or breaking. Additionally, acrylic in thin or long strips is relatively brittle and sensitive to warping due to the heat released during cutting, so keep this in mind in the design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, ensuring the sheets are fully protected before, during, and after cutting. The cut is sharp, clean, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If there are engraved areas in the design, we need to remove the film from the top side; in some cases, a small amount of smoke may deposit on the material. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded, milled, and bent afterwards. With each processing, it is important to consider that the cutting process puts pressure on the cutting edge, and if the acrylic is then processed, small cracks may occur in some cases. \u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on whether there are engraving surfaces in the design,\u003c\/span\u003e the material has protective film on both the front and back or only on the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e\n\u003cp\u003eTransparent satin acrylic has a matte\/satin surface on both sides of the material. Flat engravings have a matte white appearance. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" style=\"width: 530px;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"64\"\u003e \u003ccol width=\"83\"\u003e \u003ccol width=\"41\"\u003e \u003ccol width=\"99\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Dichtheid\"}' style=\"width: 69px;\"\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Diktetolerantie\"}' style=\"width: 105px;\"\u003e\u003cstrong\u003eThickness tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snedebreedte\"}' style=\"width: 106px;\"\u003e\u003cstrong\u003eCut width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snedebreedte\"}' style=\"width: 129px;\"\u003e\u003cstrong\u003eType of acrylic\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"1.2\"}' style=\"width: 69px;\"\u003e1.2 g\/cm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"\u0026lt;0.1mm\"}' style=\"width: 105px;\"\u003e\u0026lt;15%\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"0.2 mm\"}' style=\"width: 106px;\"\u003e0.2 mm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"0.2 mm\"}' style=\"width: 129px;\"\u003eCast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31779596992645,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/satijn-transparant-acrylaat-902091.jpg?v=1658954199"},{"product_id":"acrylaat-satijn-dekkend-wit","title":"Acrylic matt white","description":"\u003cp\u003eWhite opaque matt acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, opaque plastic. The material is provided with a finely matted surface on both sides. The matted surface feels and looks sandblasted, but the effect was achieved during the casting process and provides a less \u0026quot;sharp\u0026quot; structure shape than with sandblasted surfaces.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSatin acrylic has many applications, mainly in decorative industries. This acrylic can be found in display cases, interior construction, displays, facade advertising, (name) signs and models. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are few restrictions when cutting acrylic. With finger joints it is important to take into account the thickness tolerances of acrylic to prevent internal tensions and thus cracks or breakage. Acrylic is also relatively fragile in thin or long strips and sensitive to warping due to the heat released during cutting, take this into account in the design.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAcrylic has protective film on both sides, which means the plates are fully protected before, during and after cutting. The cut is tight, clean and the same colour as the material. Engraving areas have a slightly whiter colour compared to the material. \u003c\/p\u003e  \u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the foil on both sides. If there are engraving areas in the design, we must remove the foil from the top, in some cases a small amount of smoke can then affect the material. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 250x130cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003eDouble-sided adhesive foil\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn principle Acrylic does not require post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded or milled afterwards and bent. With every operation it is important to take into account that the cutting process puts pressure on the cutting edge, if the acrylic is then processed then in some cases small cracks can occur. \u003c\/p\u003e  \u003cp\u003eTo give line and surface engravings a greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eDepending on whether there are engraving areas in the design\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003edoes the material have protective film on both the front and back or only the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e  \u003cp\u003eSatin Acrylic has a matt\/satin surface on both sides of the material. Surface engravings have a matt white appearance. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable data-mce-fragment=\"1\" width=\"100%\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e1.2 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u0026lt;15%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eUV resistant\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eType acrylic\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eCast\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50284510183771,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/satijn-wit-acrylaat-346740.jpg?v=1658954199"},{"product_id":"acrylaat-satijn-dekkend-zwart","title":"Acrylic matt black","description":"\u003cp\u003eBlack opaque Matt acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, opaque plastic. The material is provided with a finely matt surface on both sides. The matted surface feels and looks sandblasted, but the effect was achieved during the casting process and provides a less \u0026quot;sharp\u0026quot; structure shape than with sandblasted surfaces.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSatin acrylic has many applications, mainly in decorative industries. This acrylic can be found in display cases, interior construction, displays, facade advertising, (name) signs and models. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are few restrictions when cutting acrylic. With finger joints it is important to take into account the thickness tolerances of acrylic to prevent internal tensions and thus cracks or breakage. Acrylic is also relatively fragile in thin or long strips and sensitive to warping due to the heat released during cutting, take this into account in the design.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAcrylic has protective film on both sides, which means the plates are fully protected before, during and after cutting. The cut is tight, clean and the same colour as the material. Engraving areas have a slightly whiter colour compared to the material. \u003c\/p\u003e  \u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the foil on both sides. If there are engraving areas in the design, we must remove the foil from the top, in some cases a small amount of smoke can then affect the material. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 250x130cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003eDouble-sided adhesive foil\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn principle Acrylic does not require post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded or milled afterwards and bent. With every operation it is important to take into account that the cutting process puts pressure on the cutting edge, if the acrylic is then processed then in some cases small cracks can occur. \u003c\/p\u003e  \u003cp\u003eTo give line and surface engravings a greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eDepending on whether there are engraving areas in the design\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003edoes the material have protective film on both the front and back or only the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e  \u003cp\u003eSatin Acrylic has a matt\/satin surface on both sides of the material. Surface engravings have a matt white appearance. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e  \u003cmeta content=\"Sheets\" name=\"generator\"\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e  \u003ctbody data-mce-fragment=\"1\"\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e  \u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e1.2 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003e\u0026lt;15%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eUV resistant\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr data-mce-fragment=\"1\"\u003e  \u003ctd data-mce-fragment=\"1\"\u003eType acrylic\u003c\/td\u003e  \u003ctd data-mce-fragment=\"1\"\u003eCast\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cbr\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50284510151003,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/Acrylaat_satijn_zwart.png?v=1658661208"},{"product_id":"transparant-acrylaat","title":"Acrylic transparent","description":"\u003cp\u003eTransparent acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, transparent plastic. The material is very stiff and brittle compared to other plastics. Transparent acrylic is UV resistant and suitable for both indoor and outdoor use. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eTransparent Acrylic has many applications, mainly in decorative industries. This acrylic can be found in display cases, interior construction, displays, facade advertising, (name) signs and models. \u003c\/p\u003e  \u003cp\u003eBecause the material has a high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a replacement for glass. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are few restrictions when cutting acrylic. With finger joints it is important to take into account the thickness tolerances of acrylic to prevent internal tensions and thus cracks or breakage. Acrylic is also relatively fragile in thin or long strips and sensitive to warping due to the heat released during cutting, take this into account in the design.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAcrylic has protective film on both sides, which means the plates are fully protected before, during and after cutting. The cut is tight, clean and the same colour as the material. Engraving areas have a slightly whiter colour compared to the material. \u003c\/p\u003e  \u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the foil on both sides. If there are engraving areas in the design, we must remove the foil from the top, in some cases a small amount of smoke can then affect the material. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 250x130cm is possible on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003eDouble-sided adhesive foil\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eIn principle acrylic does not need to be post-processed. The material can be glued, printed, sawn, sanded, milled afterwards and bent. With every operation it is important to take into account that the cutting process puts pressure on the cutting edge, if the acrylic is then processed then in some cases small cracks can occur. \u003c\/p\u003e  \u003cp\u003eTo give line and surface engravings a greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eDepending on whether there are engraving areas in the design, the material will have protective film on both the front and back or only the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e  \u003cp\u003eAcrylic has a light surface gloss, surface engravings have a matt white appearance. Engraving lines are clearly visible from close up. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003e  \u003cspan\u003e\u003cstrong\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eDensity\u003c\/td\u003e  \u003ctd\u003e1.2 grams\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eThickness tolerance\u003c\/td\u003e  \u003ctd\u003e\u0026lt;15%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eUV resistant\u003c\/td\u003e  \u003ctd\u003eYes\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eType acrylic\u003c\/td\u003e  \u003ctd\u003eCast\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":40705324089497,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/transparant-acrylaat-395114.jpg?v=1658954199"},{"product_id":"bruin-mdf","title":"MDF Brown","description":"\u003cp\u003eBrown MDF (medium density fibreboard) is a board material that is made by pressing wood fibres together under high pressure. The material has a smooth surface and does not splinter because the material has no grain direction. Due to the smooth surface, the material is very suitable for painting.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThe applications for MDF are diverse. The material is widely used in furniture, artwork, models and packaging. For projects that require painting, MDF is an excellent choice. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAfter laser cutting there will be smoke residue on the top and bottom of the material around the cut and engravings, on both On the sides, smoke can be prevented by applying protective film. The cut are dark brown\/black and engravings are dark brown. With thin variants the material does not give off, with the thicker variants this can sometimes be the case. \u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (up to 250x120cm on request)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003eDouble-sided adhesive film, protective film top\/bottom\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eMDF can easily be mechanically processed afterwards by sawing, drilling, milling and sanding. The material can also be painted, when applying paint it is important to take into account the moisture absorbing properties of MDF, multiple base coats are often necessary.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eMDF is brown in colour, has a smooth surface and does not splinter. The material absorbs water very easily and is therefore not suitable for humid environments. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003e  \u003cspan\u003e\u003cstrong\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eDensity\u003c\/td\u003e  \u003ctd\u003e0.7 gram\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eThickness tolerance\u003c\/td\u003e  \u003ctd\u003e\u0026lt;10%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eUV resistant\u003c\/td\u003e  \u003ctd\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSuitable for outdoor use\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003eNo\u003cbr\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e  \u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible within 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":40811801903257,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/bruin-mdf-683166.jpg?v=1658694475"},{"product_id":"populieren-multiplex-1","title":"\u003ctc\u003ePoplar plywood\u003c\/tc\u003e","description":"\u003cp\u003ePoplar plywood is one of the softer types of plywood. The material is characterized by its light weight and long life. Poplar plywood can only be used indoors. The low density of this material makes an excellent wood for laser cutting.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003ePoplar plywood is often found in furniture and interior construction, artwork, advertising and promotional work and logos. The material is also excellent for low-cost packaging, prototypes and models. \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003ePay attention to thickness tolerance when designing finger and lock joints. Poplar plywood has a grain direction and this is generally vertical for a full panel, but can also be horizontal depending on how the panel is sawn. If the grain direction is important, this should be indicated in advance.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eThe cutting edges of poplar plywood colours brown\/black and gives off a little bit in the thickest version. On the top and bottom of the material there will be smoke deposits around the cut, this can largely prevented by protective film. Any smoke residue that is still on the material can easily be removed with sandpaper. \u003c\/span\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003eCutting width\u003c\/td\u003e  \u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e  \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest shape supplied\u003c\/td\u003e  \u003ctd\u003e6x6mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e  \u003ctd\u003e1mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eMaximum size\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e120x60cm (on request up to 244x122cm)\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eAdditional options\u003c\/td\u003e  \u003ctd\u003eDouble-sided adhesive film, protective film top\/bottom\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003ePost-processing of poplar plywood not necessary, if necessary the sheet material can be sent with sandpaper grit 400 for a smooth finish. Birch plywood can be painted, glued, sawn, drilled and sanded, both afterwards or beforehand. \u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable width=\"100%\"\u003e  \u003ctbody\u003e  \u003ctr\u003e  \u003ctd\u003e  \u003cspan\u003e\u003cstrong\u003eCharacteristic\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eDensity\u003c\/td\u003e  \u003ctd\u003e0.45 gram\/cm3\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eThickness tolerance\u003c\/td\u003e  \u003ctd\u003e\u0026lt;10%\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eUV resistant\u003c\/td\u003e  \u003ctd\u003eNo\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e  \u003ctd\u003eSuitable for outdoor use\u003cbr\u003e  \u003c\/td\u003e  \u003ctd\u003eYes, if treated\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e  \u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":40811894014105,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/products\/populieren-multiplex-910324.jpg?v=1658694471"},{"product_id":"acrylaat-getint-oranje","title":"\u003ctc\u003eAcrylic tinted\u003c\/tc\u003e","description":"\u003ctc\u003e\u003cdiv id=\"materialLoadCustom\" data-material=\"Acrylaat getint geel\" data-only-material=\"\"\u003e\n\u003c\/div\u003e\n\u003cp\u003eTinted acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, transparent plastic. The material is available in various colors, UV resistant, and suitable for both indoor and outdoor use. This material is available in the colors: orange, yellow, brown, red, green, blue, gray, anthracite, dark blue, dark green, and glass-look.\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eApplications\u003cbr\u003e\n\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eTinted acrylic has many applications, mainly in decorative industries. Tinted acrylic is used in showcases, interior construction, displays, facade advertising, (name) signs, and architectural models.\u003c\/p\u003e\n\u003cp\u003eBecause the material has high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a glass substitute.\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eDesign considerations\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take the thickness tolerances of acrylic into account to avoid internal stress, and thus cracks or breakage.\u003cspan\u003e\n\u003c\/span\u003e\n\u003cspan\u003eAcrylic is also relatively brittle in thin or long strips and prone to warping due to the heat released during cutting, so keep this in mind during design.\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eLaser cutting\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, so the sheets are fully protected before, during, and after cutting. The cut is tight, clean, and the same color as the material. Engraved areas have a slightly whiter color compared to the material.\u003c\/p\u003e\n\u003cp\u003eIf the design only includes cut and engraving lines, we leave the film on both sides. If the design includes engraved areas, we must remove the film from the top side, which may, in some cases, result in a small amount of smoke residue on the material.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCut width\u003c\/td\u003e\n      \u003ctd\u003e0.2mm \u003cspan\u003e(\u003c\/span\u003e\n      \u003cspan\u003e±0.05mm)\u003c\/span\u003e\n    \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eSmallest delivered shape\u003c\/td\u003e\n    \u003ctd\u003e6x6mm\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e\n    \u003ctd\u003e1mm\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eMaximum size\u003cbr\u003e\n  \u003c\/td\u003e\n  \u003ctd\u003e120x60cm (up to 250x130cm on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n  \u003ctd\u003eAdditional options\u003c\/td\u003e\n  \u003ctd\u003e\n    \u003cspan\u003eDouble-sided adhesive film\u003c\/span\u003e\n  \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n  \u003cstrong\u003ePost-processing\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded, milled, and bent afterward. With any processing, it’s important to consider that the cutting process puts pressure on the cut edge, and if the acrylic is then further processed, small cracks may occur in some cases.\u003c\/p\u003e\n\u003cp\u003eTo give line and area engravings more contrast, they can be filled with paint (color fill). When the excess paint is removed, the paint remains in the grooves.\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eAppearance\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cspan\u003eDepending on whether there are engraved areas in the design\u003c\/span\u003e\n  \u003cspan\u003e\n  \u003c\/span\u003e\n  the material has protective film on both the front and back or only on the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e\n  \u003cp\u003eTinted acrylic has a slight surface gloss and is semi-transparent. Area engravings have a matte white appearance, engraving lines are clearly visible up close. All parts are firmly packed in a box and, if necessary, supported with wood.\u003c\/p\u003e\n  \u003cp\u003e\n    \u003cstrong\u003eTechnical information\u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003ctable width=\"100%\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003e\n          \u003cspan\u003e\n            \u003cstrong\u003eProperty\u003c\/strong\u003e\n          \u003c\/span\u003e\n          \u003cbr\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            \u003cspan\u003e\n              \u003cstrong\u003eValue\u003c\/strong\u003e\n            \u003c\/span\u003e\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eDensity\u003c\/td\u003e\n          \u003ctd\u003e1.2 gram \/ cm3\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eThickness tolerance\u003c\/td\u003e\n          \u003ctd\u003e\u0026lt;15%\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eUV resistant\u003c\/td\u003e\n          \u003ctd\u003eYes\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eType of acrylic\u003c\/td\u003e\n          \u003ctd\u003eCast\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n    \u003cp\u003e\n      \u003cspan\u003e\n        \u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\n      \u003c\/span\u003e\n    \u003c\/p\u003e\n\u003c\/tc\u003e","brand":"laserlokaal","offers":[{"title":"Glass","offer_id":49441508884827,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":49441508917595,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":49441508950363,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Brown","offer_id":49441508983131,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":49441509015899,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":49441509048667,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":49441509081435,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":49441509114203,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark","offer_id":49441509146971,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark green","offer_id":49441509179739,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/acrylaat-getint-209149.png?v=1734352325"},{"product_id":"microgolfkarton-zwart","title":"Black micro-corrugated cardboard","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAvailable format: 3mm 960mmx700mm) | €9.38 incl. VAT per sheet\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBlack corrugated cardboard (E-Flute) is a sturdy, lightweight, thin type of cardboard characterized by a through-and-through black color. The material consists of 2 thin cardboard sheets with a corrugated sheet in between, making it not only relatively sturdy but also quick to process. The channels run parallel to the longest side of the sheet. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBlack corrugated cardboard is a constructive material commonly found in displays, promotional items, packaging, and 3D models. A major advantage of black corrugated cardboard is that it can be easily printed on either before or after processing.\u003c\/p\u003e\u003cp\u003eBecause the material and processing are relatively inexpensive compared to other materials, it is often used for prototypes and POS applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrugated cardboard is most suitable for cutting; line engravings are also possible, but due to the power of the laser cutters, the engraving lines may still slightly penetrate the material in some cases.\u003c\/p\u003e\n\u003cp\u003eSurface engraving is possible but not recommended due to the wavy core. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrugated cardboard is cut very quickly, resulting in very little soot residue on the cut. The edges can be wiped with a dry cloth if necessary. Protective film cannot be applied to cardboard. \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Width\u003c\/td\u003e\n\u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Included Shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e960mmx700mm\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Options\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrugated cardboard generally does not require post-processing; however, any small amount of soot on the cutting edge can be removed with a dry cloth or air pressure. The material is suitable for painting, printing, or gluing with wood glue or all-purpose glue afterwards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"\u0026gt; Verkrijgbaar in verschillende afmetingen: 900x600mm, 600x600mm, 600x300mm, 900x300mm, 300x300mm\\n\u0026gt; Sterk, buigzaam materiaal met een hoge slijtvastheid.\\n\u0026gt; Gladde afwerking, splintert niet\\n\u0026gt; Overschilderbaar, er wordt aangeraden dit in meerdere lagen te doen.\"}' data-sheets-userformat='{\"2\":14780,\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":3,\"14\":[null,2,0],\"15\":\"Calibri\",\"16\":11}' style=\"box-sizing: border-box;\"\u003eThe sheets are black and have a smooth surface; in some cases, the ribs are slightly visible. \u003cbr\u003e\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"\u0026gt; Verkrijgbaar in verschillende afmetingen: 900x600mm, 600x600mm, 600x300mm, 900x300mm, 300x300mm\\n\u0026gt; Sterk, buigzaam materiaal met een hoge slijtvastheid.\\n\u0026gt; Gladde afwerking, splintert niet\\n\u0026gt; Overschilderbaar, er wordt aangeraden dit in meerdere lagen te doen.\"}' data-sheets-userformat='{\"2\":14780,\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":3,\"14\":[null,2,0],\"15\":\"Calibri\",\"16\":11}' style=\"box-sizing: border-box;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.2 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness Tolerance\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Resistant\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery Time: Delivery possible from 1-2 business days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":49021386228059,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/microgolfkarton-zwart-506083.png?v=1740980994"},{"product_id":"neopreen-rubber","title":"Neoprene foam rubber","description":"\u003cp\u003e\u003cspan\u003eNeoprene foam rubber has closed cells, making it waterproof and non-absorbent to liquids. It is resistant to contact with seawater, flame-retardant, and reasonably oil-resistant. The material is widely used in shipping and offshore, as well as in industrial seals.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNeoprene Foam Rubber\u003cspan\u003e is a durable seal for water and other liquids, in aluminum and steel windows, the electronics industry, and partitions, industrially applicable as sound-dampening material in automotive, industry, and construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are no restrictions in designing, but it is important to consider long, thin shapes. These can shift during laser cutting due to internal tension. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeoprene rubber does not retain residue after cutting.Because the material is flexible, the dimensions of certain parts may vary slightly in reality. Engravings have little contrast. Cutting width 0.2mm (±0.05mm) Smallest included shape 6x6mm Smallest detail (engraving) 1mm Maximum size 100x50cm (up to 250x100cm possible on request) Post-processing This material can be cut with a sharp knife. Appearance Neoprene rubber is dark gray\/black in color, engraved parts have the same color as the material.\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 47.4597%;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 52.2425%;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 47.4597%;\"\u003eDensity\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 52.2425%;\"\u003e0.15 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 47.4597%;\"\u003eThickness Tolerance\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 52.2425%;\"\u003e\u0026lt;15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 47.4597%;\"\u003eUV Resistant\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 52.2425%;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery Time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":49168447668571,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/neopreen-schuimrubber-804937.png?v=1740980994"},{"product_id":"polyester-pet-g","title":"Polyester (PET-G) transparent","description":"\u003cp\u003e\u003cspan\u003ePolyester (PET-G) sheets, also known under the brand name Vivak, is a strong yet flexible plastic. The plastic is completely transparent and very impact-resistant. The material is flexible but can be bent to permanently take on a certain angle. \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePET-G is used for many different applications such as displays, poster protection, protective covers, and showcases. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePolyester has a clean, polished cut. Line engravings are possible but not very visible, complex line engravings are not recommended. Surface engravings are not possible due to melting. \u003cspan\u003eAdditionally, polyester in thin or long strips is relatively brittle and sensitive to warping due to the heat released during cutting, keep this in mind in the design. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePolyester has paper protective film on both sides, ensuring the sheets are fully protected before, during, and after cutting. The cut is sharp, clean, and the same color as the material. Line engravings are the same color as the material.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut Width\u003c\/td\u003e\n\u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Supplied Shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Detail (Engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm (we recommend at least 3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (up to 250x130cm available on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Options\u003c\/td\u003e\n\u003ctd\u003eDouble-sided Adhesive Film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, PET-G does not require post-processing due to the high quality of the material. \u003cspan\u003e The processing possibilities of polyester sheets include sawing, drilling, milling, bending, and vacuum forming. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material has protective film on \u003c\/span\u003eboth the front and back sides. The material is prone to scratches without the protective film.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 97.976px;\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003e1.38 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003eUV resistant\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":49168965992795,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/polyester-pet-g-transparant-967683.png?v=1740980994"},{"product_id":"berken-multiplex-extra-dun","title":"Birch aircraft plywood (extra thin)","description":"\u003cp\u003eBirch aircraft plywood is a flexible all-round sheet material composed of 3 thin layers of birch veneer. The material is sturdy and light in color. We supply B\/B quality plywood, meaning that both sides are virtually flawless. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBirch aircraft plywood is used for applications that require (light) flexible wood such as (scale) model building and maquettes, and applications in the field of thin sheet material such as paneling and furniture and interior construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePay attention to the thickness tolerance when designing finger and slot joints. Birch plywood has a grain direction, which is generally horizontal on a full sheet, but can also be vertical depending on how the sheet is cut. If the grain direction is important, it must be specified in advance.The sheets are bendable in the cross-grain direction (bending direction over the short side t.o.v. 120x60cm sheet).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut edges of birch aircraft plywood are black and may leave a slight residue. On the top and bottom sides of the material, there will be smoke residue around the cut, \u003cspan\u003ethis can  largely be prevented by using protective film. Any remaining smoke residue on the material can be easily removed with sandpaper. \u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 42.3689%;\"\u003eCutting Width\u003c\/td\u003e\n\u003ctd style=\"width: 54.8221%;\"\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 42.3689%;\"\u003eSmallest Included Shape\u003c\/td\u003e\n\u003ctd style=\"width: 54.8221%;\"\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 42.3689%;\"\u003eSmallest Detail (engraving)\u003c\/td\u003e\n\u003ctd style=\"width: 54.8221%;\"\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 42.3689%;\"\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 54.8221%;\"\u003e120x60cm (up to 153x130cm possible on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 42.3689%;\"\u003eAdditional Options\u003c\/td\u003e\n\u003ctd style=\"width: 54.8221%;\"\u003e\u003cspan\u003eDouble-sided adhesive film, protective film top\/bottom\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePost-processing of birch aircraft plywood is not necessary; however, the sheet material can be sent with 400 grit sandpaper for a smooth finish. Birch plywood can be painted, glued, sawn, drilled, and sanded, either afterwards or beforehand. \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBirch aircraft plywood is very light brown in color, with black cutting edges and surface and line engravings that may slightly rub off. Each sheet is almost entirely flawless on the front, while the back may have slightly more knots and plugs. \u003c\/span\u003e\u003cspan\u003eDue to the production process, the density may vary slightly. The sheets may warp slightly or not be completely straight due to their thickness. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable data-mce-fragment=\"1\" width=\"100%\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 37.7903%;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 59.4007%;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 37.7903%;\"\u003eDensity\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 59.4007%;\"\u003e0.9 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 37.7903%;\"\u003eThickness Tolerance\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 59.4007%;\"\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 37.7903%;\"\u003eSuitable for Outdoor Use\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 59.4007%;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery Time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":49169017733467,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/berken-vliegtuigtriplex-extra-dun-938740.png?v=1740980994"},{"product_id":"polyester-pet-vilt-zwart","title":"Polyester (PET) felt black","description":"\u003cp\u003ePET felt sheets are panels made from recycled PET (polyethylene terephthalate) and are often used for acoustic and decorative applications. The sheets are lightweight, flame retardant, and have acoustic properties\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe applications for PET felt include sound insulation, decorative elements, (trade show) displays, and high-end packaging.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut edge of PET felt is harder than the material due to the melted fibers. Line engravings are possible but almost invisible. However, engraving lines can be used to make the material more flexible\/hinged. Surface engravings are not possible due to melting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut is neat, clean, and the same color as the material. Line engravings have the same color as the material.The (slightly) melted edges are somewhat smooth.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting width\u003c\/td\u003e\n\u003ctd\u003e0.2mm (\u003cspan\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest included shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (up to 250x130cm available on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional options\u003c\/td\u003e\n\u003ctd\u003eDouble-sided adhesive film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET felt does not require post-processing. There are no visible marks from the cutting process on the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material is delivered without protective film. The sheets are smooth, fibrous, and completely black.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 97.976px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e0.13 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eThickness Tolerance\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eUV Resistant\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery Time: Delivery possible from 1-2 business days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50166586179931,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/polyester-pet-vilt-zwart-450896.png?v=1740980994"},{"product_id":"acrylaat-mat","title":"Acrylic matte","description":"\u003cdiv data-only-material=\"\" data-material=\"Acrylaat mat roze\" id=\"materialLoadCustom\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0); text-decoration: underline;\"\u003eMatte acrylic champagne is being phased out. Call for current stock.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMatte acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, semi-transparent plastic. The material is provided with a finely matte surface on both sides. The matte surface feels and appears sandblasted, but the effect is achieved during the casting process and results in a less \"sharp\" structural form than sandblasted surfaces. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSatin acrylic has many applications, mainly in decorative industries. The material can be found in showcases, interior construction, displays, facade advertising, (name) plates, and models. Very beautiful to use with LED lighting, the translucent light is softly diffused.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to consider the thickness tolerances of acrylic to prevent internal stresses and thereby avoid cracking or breaking.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAcrylic in thin or long strips is also relatively brittle and sensitive to warping due to the heat released during cutting, so keep this in mind in the design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, ensuring the sheets are fully protected before, during, and after cutting. The cut is sharp, clean, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides.If there are engraving areas in the design, we need to remove the film from the top side, which in some cases may result in a small amount of smoke residue on the material or small scratches.  \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Width\u003c\/td\u003e\n\u003ctd\u003e0.2mm \u003cspan\u003e(\u003c\/span\u003e\u003cspan\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Included Shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Detail (engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (up to 250x130cm possible on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Options\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eDouble-sided Adhesive Film\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle acrylic does not need post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded, milled, and bent afterwards.During each operation, it is important to consider that the cutting process puts pressure on the cutting edge, and if the acrylic is subsequently processed, small cracks may occur in some cases. \u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on whether there are engraving areas in the design\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ethe material has protective film on both the front and back or only on the back. The material is prone to scratches without protective film.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSatin acrylic has a matte\/satin surface on both sides of the material. The material is opaque but allows light to pass through. Line and surface engravings have a matte white appearance.All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.2 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness tolerance\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV resistant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType of acrylic\u003c\/td\u003e\n\u003ctd\u003eCast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Apricot","offer_id":49441480868187,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Anthracite","offer_id":49441480900955,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Bordeaux","offer_id":49441480933723,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Cyclamen","offer_id":49441480966491,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Light Blue","offer_id":49441480999259,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Lime Green","offer_id":49441481032027,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Moss Green","offer_id":49441481064795,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Night Blue","offer_id":49441481097563,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Peacock Blue","offer_id":49441481163099,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":49441481195867,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Pink","offer_id":49441481228635,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Glass","offer_id":49441481261403,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":49441481294171,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Cactus Green","offer_id":49441481326939,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Champagne","offer_id":49441481359707,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/acrylaat-mat-964808.png?v=1734352400"},{"product_id":"acrylaat-fluor","title":"Acrylic Fluor","description":"\u003cdiv data-only-material=\"\" data-material=\"Acrylaat fluor blauw\" id=\"materialLoadCustom\"\u003e\u003c\/div\u003e\n\u003cp\u003eFluor acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, semi-transparent plastic. The material is very similar to tinted acrylic but distinguishes itself with several unique features. Fluor acrylic is more transparent than tinted acrylic, but edges (and also engravings) light up within the material. This effect can be enhanced by illuminating the sheet from the side. The material is available in the colors orange, yellow, blue, green, and red. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluor acrylic has many applications, mainly in decorative industries, and the material can be found in showcases, interior construction, displays, (illuminated) advertising, (name) signs, and models. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to consider the thickness tolerances of acrylic to prevent internal stresses and thereby avoid cracking or breaking.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAcrylic in thin or long strips is also relatively brittle and sensitive to warping due to the heat released during cutting, so keep this in mind in the design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, ensuring the sheets are fully protected before, during, and after cutting. The cut is tight, clean, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides.If there are engraving areas in the design, we need to remove the film from the top side, in some cases, a small amount of smoke may settle on the material. \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Width\u003c\/td\u003e\n\u003ctd\u003e0.2mm (\u003cspan\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Supplied Shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Detail (engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (up to 250x130cm available on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Options\u003c\/td\u003e\n\u003ctd\u003eDouble-sided Adhesive Film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle acrylic does not need post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded, milled and bent afterwards.With each operation, it is important to consider that the cutting process puts pressure on the cutting edge, and if the acrylic is subsequently processed, small cracks may occur in some cases. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on whether there are engraving surfaces in the design\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ethe material has protective film on both the front and back or only on the back.  The material is scratch-sensitive without protective film.\u003c\/p\u003e\n\u003cp\u003eFluor acrylic has a slight surface gloss and is semi-transparent. Surface and line engravings have a matte white appearance and are clearly visible. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.2 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness Tolerance\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Resistant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType of Acrylic\u003c\/td\u003e\n\u003ctd\u003eCast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery Time: Delivery possible from 1-2 business days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Red","offer_id":49444447846747,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":49444447879515,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":49444447912283,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":49444447945051,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":49444447977819,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/acrylaat-fluor-283284.jpg?v=1734352255"},{"product_id":"acrylaat-translucent","title":"Acrylic","description":"\u003cdiv data-only-material=\"\" data-material=\"Acrylaat blauw\" id=\"materialLoadCustom\"\u003e\u003c\/div\u003e\n\u003cp\u003eAcrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard plastic. The material is available in various colors, UV resistant, and suitable for both indoor and outdoor use. The sheets are opaque but allow a small amount of light to pass through. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTranslucent acrylic has many applications, mainly in decorative industries. Acrylic can be found in showcases, interior construction, displays, facade advertising, (name) signs, and models. \u003c\/p\u003e\n\u003cp\u003eBecause the material has high impact resistance and is 25 times stronger and 50% lighter than glass, it is often used as a replacement for glass. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to consider the thickness tolerances of acrylic to prevent internal stresses and thereby avoid cracking or breaking. \u003cspan\u003eAcrylic in thin or long strips is relatively brittle and sensitive to warping due to the heat released during cutting, so keep this in mind in the design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, ensuring the sheets are fully protected before, during, and after cutting. The cut is sharp, clean, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If there are engraved areas in the design, we need to remove the film from the top side, and in some cases, a small amount of smoke may deposit on the material. \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Width\u003c\/td\u003e\n\u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Included Shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Detail (engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (up to 250x130cm possible on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Options\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eDouble-sided Adhesive Film\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle acrylic does not need post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded, milled, and bent afterwards.During each operation, it is important to consider that the cutting process puts pressure on the cutting edge, and if the acrylic is subsequently processed, small cracks may occur in some cases. \u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on whether there are engraving areas in the design\u003c\/span\u003e, the material has protective film on both the front and back or only on the back. The material is prone to scratches without protective film.\u003c\/p\u003e\n\u003cp\u003eAcrylic has a slight surface gloss, and surface engravings have a matte white appearance. Engraving lines are clearly visible up close. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e1.2 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eThickness Tolerance\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\u0026lt;15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eUV Resistant\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eType of Acrylic\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eCast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery Time: Delivery possible from 1-2 business days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Green","offer_id":49701053137243,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":49701053170011,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Bordeaux","offer_id":49701053202779,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":49701053268315,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark Green","offer_id":49701053301083,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark Blue","offer_id":49701053333851,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Pink","offer_id":49701053366619,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":49701053399387,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Orange-yellow","offer_id":49701053432155,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Purple","offer_id":49701053464923,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":49701053497691,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/acrylaat-283370.jpg?v=1734352272"},{"product_id":"acrysign-acrylaat","title":"Acrysign (Acrylic)","description":"\u003cdiv data-only-material=\"\" data-material=\"Acrysign (Acrylaat) Mat\/Glans Zwart (RAL 9005)\" id=\"materialLoadCustom\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0); text-decoration: underline;\"\u003eMint green Acrysign is being phased out. Call for current stock.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAcrysign (also available as Acrylox) acrylic is an 8mm thick opaque PMMA sheet available in various colors. The material has a finely matte surface on one side, and the finish on the other side is high gloss. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrysign is mainly used for facade letters and logos, both indoors and outdoors. The material can also be used for applications where (colored) thick acrylic is needed. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to consider the thickness tolerances of acrylic to prevent internal stresses and thus cracking or breaking.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAlso, acrylic in thin or long strips is relatively brittle and sensitive to warping due to the heat released during cutting, keep this in mind in the design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, ensuring the sheets are fully protected before, during, and after cutting. The cut is tight, clean, and the same color as the material. Engraving areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the film on both sides. If there are engraving areas in the design, we need to remove the film from the top side, in some cases, a small amount of smoke may deposit on the material. \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Width\u003c\/td\u003e\n\u003ctd\u003e0.25mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Supplied Shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Detail (Engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (up to 250x130cm available on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Options\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eDouble-sided Adhesive Film\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eImportant: by default, we place the sheet with the satin (matte) side facing up in the machine. If you prefer to have the sheet cut with the high-gloss side facing up, please indicate this in the comments field when ordering. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded, milled and bent afterwards. With each processing, it is important to consider that the cutting process puts pressure on the cutting edge, and if the acrylic is then processed, small cracks may occur in some cases. \u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on whether there are engraving surfaces in the design\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ethe material has protective film on both the front and back or only on the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAcrysign is completely opaque. Line and surface engravings have a matte white appearance.All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eDensity\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e1.2 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eThickness tolerance\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\u0026lt;15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eUV resistant\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eType of acrylic\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eCast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Matte\/Gloss Night Blue (RAL 5022)","offer_id":49701156028763,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Matte\/Glossy Orange (RAL 2004)","offer_id":49701156061531,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Matte\/Gloss Signal Red (RAL 3001)","offer_id":49701156094299,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Matte\/Gloss Ultramarine Blue (RAL 5002)","offer_id":49701156127067,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Matte\/Gloss Traffic Blue (RAL 5017)","offer_id":49701156159835,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Matte\/Gloss Traffic Yellow (RAL 1023)","offer_id":49701156192603,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Matte\/Gloss Traffic Red (RAL 3020)","offer_id":49701156225371,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Matte\/Gloss White (RAL 9016)","offer_id":49701156258139,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Matte\/Gloss Black (RAL 9005)","offer_id":49701156290907,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Gloss Yellow Green (RAL 6018)","offer_id":49701156323675,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Matte\/Glossy Grey (RAL 7016)","offer_id":49701156356443,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Mintgroen (RAL 6024)","offer_id":51378719883611,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/acrysign-acrylaat-340884.jpg?v=1734352300"},{"product_id":"mdf-wit","title":"MDF white","description":"\u003cp\u003eWhite MDF (medium density fibreboard) is a fiberboard material made by compressing wood fibers under high pressure and applying a white (foil) coating on one side. The material has a smooth surface and does not splinter because it has no grain direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe applications for white MDF are diverse. The material is frequently used in furniture, artworks, models, and packaging. For projects that need to be perfectly white, the material is a very suitable solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, there will be smoke residue on the top and bottom of the material around the cuts and engravings. Due to the white color on the front of the material, this residue is more visible than with other materials. The smoke residue can be prevented on both sides by using protective film.The cuts are dark brown\/black and engravings are dark brown.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut width\u003c\/td\u003e\n\u003ctd\u003e0.2mm (\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest included shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (on request up to 244x122cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtra options\u003c\/td\u003e\n\u003ctd\u003eDouble-sided adhesive foil, protective foil top\/bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMDF can be easily mechanically processed afterwards by sawing, drilling, milling, and sanding. Note that this can damage\/remove the white side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMDF is brown in color and has a white front side due to a lacquer carrier foil layer. The material has a very smooth surface and does not splinter.The material absorbs water very easily and is therefore not suitable for humid environments. Cut edges and engravings are brown in color. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.7 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness tolerance\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV resistant\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable for outdoor use\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eNo\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50164952957275,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/mdf-wit-888988.png?v=1740980993"},{"product_id":"acrylaat-transparant-geextrudeerd-xt","title":"Acrylic Transparent Extruded (XT)","description":"\u003cp\u003eExtruded (XT) Transparent acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, transparent plastic. The material distinguishes itself from regular acrylic by the precise thickness tolerance obtained through the production process, namely the rolling of the sheet material. This process makes this type of acrylic very suitable for dimensionally stable applications. A disadvantage of extruded acrylic is that there is more tension on the material, which can cause small (hairline) cracks on the edge due to gluing or incorrect cleaning agents. Additionally, the material is not suitable for flat engravings due to this extra tension. The material is UV resistant and suitable for both indoor and outdoor use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTransparent acrylic has many applications, mainly in decorative industries.This acrylic is mainly found in applications that require high dimensional stability, such as model building, construction kits, and (small) mechanization.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to consider the thickness tolerances of acrylic to prevent internal stresses and thus cracking or breaking. Additionally, acrylic in thin or long strips is relatively brittle and sensitive to warping due to the heat released during cutting, so keep this in mind in the design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, ensuring the sheets are fully protected before, during, and after cutting. The cut is sharp, clean, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the foil on both sides. If there are engraving areas in the design, we need to remove the foil from the top side, which in some cases may result in a small amount of smoke residue on the material. \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Width\u003c\/td\u003e\n\u003ctd\u003e0.2mm (\u003cspan\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Supplied Shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Detail (Engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (up to 250x130cm possible on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Options\u003c\/td\u003e\n\u003ctd\u003eDouble-sided Adhesive Film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing, and for extruded acrylic, it is also discouraged due to the extra stress on the material. It cannot be glued, sawn, or bent. \u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). If the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material has protective film on both the front and back sides. The material is scratch-sensitive without the protective film.\u003c\/p\u003e\n\u003cp\u003eAcrylic has a slight surface gloss, and engraving lines are clearly visible up close. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.2 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness Tolerance\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Resistant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType of Acrylic\u003c\/td\u003e\n\u003ctd\u003eExtruded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery Time: Delivery possible from 1-2 business days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50165492842843,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/transparant-acrylaat-395114.jpg?v=1741031233"},{"product_id":"gefineerd-eikenhout","title":"Veneered Oak Double-Sided","description":"\u003cp\u003eVeneered Oak (A\/B) is a high-quality veneered wood type. The core consists of a layer of brown HDF, and both sides are covered with the highest quality natural oak veneer available on the market. The veneer gives the panel a solid wood appearance. The advantage of Veneered MDF compared to a solid wood panel is that MDF hardly warps. \u003c\/p\u003e\n\u003cp\u003eVeneered MDF is available in various types of wood veneer, each with a unique pattern and color. The panel material has a flawless visible side (A) and an almost flawless reverse side (B). \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis variant is specifically suitable for applications where both the front and back sides are visible. \u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe applications for veneered MDF are primarily aesthetic; the material is often used for high-quality finishes, POS materials, and for applications that require a natural appearance. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVeneered wood has a grain direction, which is generally vertical on a full sheet but can also be horizontal depending on how the sheet is cut. If the grain direction is important, it should be specified in advance. Veneer is a natural product, so the sheets may vary slightly in pattern and color. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, there will be smoke residue on the top and bottom of the material around the cut and engravings. On both sides, the smoke residue can be prevented by using protective film.The cuts are dark brown\/black and engravings are dark brown. Due to the burning on the cut, it is not visible that the core material is MDF, the sheets appear solid. \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut Width\u003c\/td\u003e\n\u003ctd\u003e0.2mm (\u003cspan\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Supplied Shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Detail (Engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (on request up to 240x120cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Options\u003c\/td\u003e\n\u003ctd\u003eDouble-sided adhesive foil, protective foil top\/bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVeneered MDF can be easily mechanically processed afterwards by sawing, drilling, milling, and sanding. The material can also be lacquered or oiled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material is light brown in color and has the texture of natural oak. The material absorbs water very easily and is therefore not suitable for humid environments. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 97.976px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e0.7 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eThickness tolerance\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eUV resistant\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eSuitable for outdoor use\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eNo\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50173886890331,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/gefineerd-eikenhout-enkelzijdig-341288.png?v=1743973498"},{"product_id":"biopanel","title":"Biopanel","description":"\u003cp\u003e\u003cspan\u003eBio panel sheets are made from industrial hemp and Biological PLA. The sheets are biobased, which means they are made from biological products, and the material is also biodegradable, meaning it is biologically degradable. The sheets are produced in Europe. They are dark brown in color. Unlike other bioplastics, Bio panel is suitable for outdoor applications, and the sheets last at least 10 years. The Bio panel is CO-2 neutral\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eApplications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBio panel is a good bioplastic replacement for Trespa and Dibond, and the properties of Bio panel are largely similar to these materials. The sheets are easy to print on and to laminate. Because the sheets last at least 10 years, even with outdoor use, they are well-suited for applications such as: signage, displays, and wayfinding.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLaser Cutting\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material cuts like regular plastic, the cut is clean and precise. This also applies to surface engravings. Due to the cutting process, residue may form on the underside of the material, which can be prevented with protective film. Residue on the top side mainly occurs due to surface engravings, but cutting and engraving lines also contribute to this. Residue on the top side of the material can be prevented by using protective film on the top side.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Width\u003c\/td\u003e\n\u003ctd\u003e0.2mm \u003cspan\u003e(\u003c\/span\u003e\u003cspan\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Delivered Shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest Detail (Engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e100x50cm (up to 200x120cm available on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Options\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eDouble-sided adhesive film, protective film top\/bottom\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cb\u003eAppearance\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material is dark brown in color (comparable to Ral 8017) and has a natural appearance. The color may vary slightly between sheets. UV light causes the sheet to fade slightly, but this does not compromise the quality of the material. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.27 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness Tolerance\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Resistant\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50309334139227,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/biopanel-889709.png?v=1743062098"},{"product_id":"gefineerd-eikenhout-a-r","title":"Veneered Oak Wood Single-Sided","description":"\u003cp\u003eVeneered Oak (A\/R) is a high-quality veneered wood type. The core consists of a layer of brown HDF, the front is covered with the highest quality natural oak veneer available on the market, and the back with a \"red\" layer of okoume counter veneer to prevent the panels from warping. The veneer gives the panel a solid wood appearance. The advantage of Veneered MDF compared to a solid wood panel is that MDF hardly warps. \u003c\/p\u003e\n\u003cp\u003eVeneered MDF is available in various types of wood veneer, each with a unique pattern and color. The panel material has a flawless visible side (A) and an okoume red backside. \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis type is specifically suitable for applications where only the front side is visible. \u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe applications for veneered MDF are primarily aesthetic; the material is often used for high-quality finishes, POS materials, and for applications that require a natural appearance. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVeneered wood has a grain direction, which is generally vertical on a full sheet but can also be horizontal depending on how the sheet is cut. If the grain direction is important, it should be specified in advance. Veneer is a natural product, so the sheets may vary slightly in pattern and color. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, there will be smoke residue on the top and bottom of the material around the cut and engravings. On both sides, the smoke residue can be prevented by using protective film.The cuts are dark brown\/black and engravings are dark brown. Due to the burning on the cut, it is not visible that the core material is MDF, the sheets appear solid. \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut width\u003c\/td\u003e\n\u003ctd\u003e0.2mm (\u003cspan\u003e±0.05mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest supplied shape\u003c\/td\u003e\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum size\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e120x60cm (on request up to 240x120cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtra options\u003c\/td\u003e\n\u003ctd\u003eDouble-sided adhesive foil, protective foil top\/bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVeneered MDF can be easily mechanically processed afterwards by sawing, drilling, milling, and sanding. The material can also be lacquered or oiled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material is light brown in color and has the texture of natural oak. The material absorbs water very easily and is therefore not suitable for humid environments. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 97.976px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e0.7 grams \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eThickness Tolerance\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eUV Resistant\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eSuitable for Outdoor Use\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eNo\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery Time: Delivery possible from 1-2 business days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50369987903835,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/gefineerd-eikenhout-enkelzijdig-341288.png?v=1743973498"},{"product_id":"gefineerd-notenhout-enkelzijdig","title":"Veneered Walnut Single-Sided","description":"\u003ctc\u003e\u003cdiv data-only-material=\"\" data-material=\"Gefineerd Notenhout Enkelzijdig\" id=\"materialLoadCustom\"\u003e\u003c\/div\u003e\n\u003cp\u003eVeneered Walnut (A\/R) is a high-quality veneered wood type. The core consists of a layer of brown HDF, the front is covered with the highest quality natural walnut veneer the market has to offer, and the back with a \"red\" layer of okoume counter veneer to prevent the panels from warping. The veneer gives the panel a solid wood appearance. The advantage of veneered MDF compared to a solid wood panel is that MDF hardly warps. \u003c\/p\u003e\n\u003cp\u003eVeneered MDF is available in various types of wood veneer, each with a unique pattern and color. The panel material has a flawless visible side (A) and an okoume red backside. \u003cem\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003eThis type is specifically suitable for applications where only the front side is visible. \u003c\/span\u003e\n\u003c\/em\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eApplications\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eThe applications for veneered MDF are primarily aesthetic; the material is often used for high-quality finishes, POS materials, and for applications that require a natural appearance. \u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eVeneered wood has a grain direction, which is generally vertical on a full sheet but can also be horizontal depending on how the sheet is cut. If the grain direction is important, it should be specified in advance. Veneer is a natural product, so the sheets may vary slightly in pattern and color. \u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, there will be smoke residue on the top and bottom of the material around the cut and engravings. On both sides, the smoke residue can be prevented by using protective film.The cuts are dark brown\/black and engravings are dark brown. Due to the burning on the cut, it is not visible that the core material is MDF; the sheets appear solid. \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCut Width\u003c\/td\u003e\n      \u003ctd\u003e0.2mm (\u003cspan\u003e±0.05mm)\u003c\/span\u003e\n    \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eSmallest Supplied Shape\u003c\/td\u003e\n    \u003ctd\u003e6x6mm\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eSmallest Detail (Engraving)\u003c\/td\u003e\n    \u003ctd\u003e1mm\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eMaximum Size\u003c\/td\u003e\n    \u003ctd\u003e120x60cm (on request up to 240x120cm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eAdditional Options\u003c\/td\u003e\n    \u003ctd\u003eDouble-sided adhesive foil, protective foil top\/bottom\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n  \u003cstrong\u003ePost-processing\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eVeneered MDF can be easily mechanically processed afterwards by sawing, drilling, milling, and sanding. The material can also be lacquered or oiled.\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eAppearance\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003eThe material is light brown in color and has the texture of natural walnut. The material absorbs water very easily and is therefore not suitable for humid environments. \u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003eTechnical Information\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 97.976px;\"\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"height: 19.5952px;\"\u003e\n      \u003ctd style=\"height: 19.5952px;\"\u003e\n        \u003cspan\u003e\n          \u003cstrong\u003eProperty\u003c\/strong\u003e\n        \u003c\/span\u003e\n      \u003c\/td\u003e\n      \u003ctd style=\"height: 19.5952px;\"\u003e\n        \u003cspan\u003e\n          \u003cstrong\u003eValue\u003c\/strong\u003e\n        \u003c\/span\u003e\n      \u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"height: 19.5952px;\"\u003e\n      \u003ctd style=\"height: 19.5952px;\"\u003eDensity\u003c\/td\u003e\n      \u003ctd style=\"height: 19.5952px;\"\u003e0.7 grams \/ cm3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"height: 19.5952px;\"\u003e\n      \u003ctd style=\"height: 19.5952px;\"\u003eThickness Tolerance\u003c\/td\u003e\n      \u003ctd style=\"height: 19.5952px;\"\u003e\u0026lt;10%\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"height: 19.5952px;\"\u003e\n      \u003ctd style=\"height: 19.5952px;\"\u003eUV Resistant\u003c\/td\u003e\n      \u003ctd style=\"height: 19.5952px;\"\u003eNo\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"height: 19.5952px;\"\u003e\n      \u003ctd style=\"height: 19.5952px;\"\u003eSuitable for Outdoor Use\u003c\/td\u003e\n      \u003ctd style=\"height: 19.5952px;\"\u003eNo\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cspan\u003e\n    \u003cb\u003eDelivery Time: Delivery possible from 1-2 business days\u003c\/b\u003e\n  \u003c\/span\u003e\n\u003c\/p\u003e\u003c\/tc\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50678866477403,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/gefineerd-notenhout-enkelzijdig-251480.png?v=1748340884"},{"product_id":"gefineerd-mahonie-enkelzijdig","title":"Gefineerd Mahonie Enkelzijdig","description":"\u003cdiv id=\"materialLoadCustom\" data-material=\"Gefineerd Notenhout Enkelzijdig\" data-only-material=\"\"\u003e\u003c\/div\u003e\n\u003cp\u003eGefineerd Mahonie (A\/R) is een hoge kwaliteit gefineerde houtsoort. De kern bestaat uit een laag bruin HDF, de voorzijde is bekleed met de hoogste kwaliteit natuurlijk mahonie fineer wat de markt te bieden heeft, de achterzijde met een \"rode\" laag okoume tegenfineer om het kromtrekken van de platen te voorkomen. Door het fineer krijgt de plaat een massief houten uitstraling. Het voordeel van gefineerd MDF ten opzichte van een massief houten plaat is dat MDF nagenoeg niet krom trekt. \u003c\/p\u003e\n\u003cp\u003eGefineerd MDF is verkrijgbaar in verschillende soorten houtfineer met elk een unieke tekening en kleur. Het plaatmateriaal heeft een foutloze zichtzijde (A) en okoume rode achterzijde. \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDeze soort is specifiek geschikt voor voor toepassingen waarbij alleen de voorzijde zichtbaar is. \u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToepassingen\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDe toepassingen voor gefineerd MDF zijn voornamelijk esthetisch, het materiaal wordt vaak ingezet voor hoogwaardige afwerkingen, POS materialen en voor toepassingen die een natuurlijke uitstraling vereisen. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAandachtspunten ontwerp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGefineerd hout heeft een nerf richting en deze is over het algemeen verticaal bij een volledige plaat, maar kan ook horizontaal zijn afhankelijk van hoe de plaat gezaagd is. Indien de nerf richting belangrijk is dient dit vooraf aangegeven te worden. Fineer is een natuurproduct, de platen kunnen daarom in tekening en kleur onderling een klein beetje verschillen. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLasersnijden\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNa het lasersnijden zal er rookaanslag op de bovenkant en onderkant van het materiaal zitten rondom de snede en gravures, aan beide kanten kan de rookaanslag voorkomen worden door beschermfolie. De snede zijn donker bruin\/zwart en gravures zijn donker bruin. Door de verbranding op de snede is het niet zichtbaar dat het kernmateriaal MDF is, de platen ogen massief.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNabewerking\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGefineerd MDF kan gemakkelijk achteraf mechanisch bewerkt worden door te zagen, boren, frezen en schuren. Ook kan het materiaal gelakt of geolied worden.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUiterlijk\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHet materiaal is lichtbruin van kleur een heeft de structuur van natuurlijk mahonie. Het materiaal neemt zeer gemakkelijk water op en is daarom niet geschikt voor vochtige omgevingen. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnische informatie\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"height: 97.976px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\n\u003cspan\u003e\u003cstrong\u003eEigenschap\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\u003cspan\u003e\u003cstrong\u003eWaarde\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eDichtheid\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e0,7 gram \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eDiktetolerantie\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eUV bestendig\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eNee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eGeschikt voor buitenshuis gebruik\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eNee\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eLevertijd: Levering vanaf 1-2 werkdagen mogelijk\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":51192793465179,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/gefineerd-mahonie-enkelzijdig-4423024.png?v=1755453577"},{"product_id":"linde-multiplex","title":"Linde multiplex","description":"\u003cp\u003eLinde multiplex is een lichtgewicht, fijnnervig plaatmateriaal met een egaal oppervlak. De houtstructuur is subtiel en vrijwel noestvrij, wat het zeer geschikt maakt voor strakke ontwerpen en nauwkeurige detaillering. Door de zachte houtsoort is het makkelijk te bewerken. De houtsoort kan het beste omschreven worden als een combinatie van de voordelen van berken en populieren multiplex, het is stevig, heeft een glad oppervlak, licht van gewicht en splintert niet. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToepassingen\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIdeaal voor maquettes, sierobjecten, productverpakkingen, interieurdecoratie, typografie en andere toepassingen waarbij een lichte kleur en fijne gravure gewenst zijn. Ook geschikt voor bouwpakketten omdat het materiaal niet splintert. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAandachtspunten ontwerp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLinde is relatief zacht en daardoor gevoelig voor indrukken of krassen bij intensief gebruik. Kleine details zijn goed mogelijk, maar dunne onderdelen kunnen kwetsbaar zijn bij buigen of belasting. Hout kan licht verkleuren onder invloed van zonlicht.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLasersnijden\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDe snijranden van linde multiplex kleuren bruin\/zwart en geven niet af. Aan de bovenzijde van het materiaal zal rondom de snede een minimale hoeveelheid rookaanslag zitten, aan de onderzijde is de rookaanslag meer aanwezig. Helaas is bij dit materiaal beschermfolie niet mogelijk in verband met het feit dat beschemfolie niet (goed) blijft plakken aan het materiaal. \u003cspan\u003eEventuele rookaanslag kan gemakkelijk met een schuurpapiertje verwijderd worden. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNabewerking\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNabewerken van linde multiplex niet noodzakelijk. Goed te lijmen, schuren en verven. Eventuele lichte verbrande randen kunnen eenvoudig worden verwijderd met fijn schuurpapier. Lakken of oliën versterkt het warme kleurcontrast van het hout.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUiterlijk\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLinde multiplex is zeer lichtgeel tot crème van kleur, egaal en fijn van structuur. snijranden en vlak- en lijngravures zijn donkerbruin en geven niet af. Elke plaat is geheel foutloos aan de voorkant en achterkant.\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":51192962154843,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/linde-multiplex-8488804.png?v=1755453578"},{"product_id":"sam-pure-grass-biobased-vezelplaat","title":"SAM Pure Grass biobased vezelplaat","description":"\u003cp\u003eSAM Pure Grass is een biobased plaatmateriaal gemaakt van geperste grasvezels en natuurlijke bindmiddelen, geproduceerd in Nederland. Het heeft een karakteristieke, vezelige structuur met zichtbare natuurlijke insluitingen. Het materiaal is stevig, lichtgewicht en composteerbaar, en vormt een duurzaam alternatief voor conventionele hout- en kunststofplaten.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToepassingen\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUitermate geschikt voor duurzame verpakkingen, POS-materiaal, productdisplays, ecodesign, educatieve modellen en decoratieve elementen met een natuurlijke uitstraling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAandachtspunten ontwerp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDoor de vezelstructuur kunnen fijne details aan de randen brokkelen. Grote oppervlakken blijven stabiel, maar het materiaal is minder geschikt voor zeer dunne onderdelen of structurele belasting. Hou bij het ontwerpen rekening met lichte kleurvariaties tussen platen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLasersnijden\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDoor het productieproces behoudt het materiaal een zwarte aanslag op en rondom de snede. De aanslag geeft bijna niet af. Beschermfolie verminderd de aanslag op het oppervlakte van het materiaal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNabewerken\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSAM Pure Grass kan gemakkelijk achteraf mechanisch bewerkt worden door te zagen, boren, frezen en schuren. Ook geschikt om te verlijmen\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUiterlijk\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHet materiaal heeft een natuurlijke, matte uitstraling met vezels zichtbaar aan oppervlak. Lichtgroen tot beige met kleurnuances. Het materiaal neemt zeer gemakkelijk water op en is daarom niet geschikt voor vochtige omgevingen. \u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":51193005965659,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/sam-pure-grass-biobased-vezelplaat-1096407.png?v=1755453581"},{"product_id":"houtkarton-wit","title":"Houtkarton wit","description":"\u003cp\u003eNatuurlijk wit houtkarton vervaardigd uit 100 % houtpulp, zuurvrij en pH‑neutraal. Het heeft een glad en degelijk oppervlak met uitstekende planheid—een stevig en betrouwbaar materiaal voor diverse creatieve toepassingen. In tegenstelling tot massief karton geeft de rand (snede) nauwlijks af door de samenstelling van het materiaal. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToepassingen\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eGeschikt voor tekenen, drukwerk, modelbouw, knutselen en andere creatieve projecten waarbij een stevige, witte ondergrond gewenst is.\u003c\/span\u003e\u003cspan class=\"\" data-state=\"closed\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\" data-testid=\"webpage-citation-pill\"\u003e\u003ca href=\"https:\/\/www.gerstaecker.nl\/Houtkarton-wit.html?utm_source=chatgpt.com\" rel=\"noopener\" alt=\"https:\/\/www.gerstaecker.nl\/Houtkarton-wit.html?utm_source=chatgpt.com\" class=\"flex h-4.5 overflow-hidden rounded-xl px-2 text-[9px] font-medium text-token-text-secondary! bg-[#F4F4F4]! dark:bg-[#303030]! transition-colors duration-150 ease-in-out\" target=\"_blank\"\u003e\u003cspan class=\"relative start-0 bottom-0 flex h-full w-full items-center\"\u003e\u003cspan class=\"flex h-4 w-full items-center justify-between\"\u003e\u003cspan class=\"max-w-full grow truncate overflow-hidden text-center\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAandachtspunten ontwerp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEr zijn weinig restricties bij het ontwerpen met houtkarton. Door de vezelige aard van het materiaal kunnen kleine onderdelen scheuren of breken. Het wordt daarom aangeraden om lange of dunne onderdelen zo veel mogelijk te vermijden. \u003cspan\u003eZonder beschermfolie aan de onderzijde kan het materiaal aan de een klein beetje zwart terugslag van het laserbed krijgen. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLasersnijden\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHoutkarton kan relatief snel gesneden worden. De snede is zwart en geeft nauwlijks af. Graveerlijnen- en vlakken zijn donkerbruin tot zwart en kunnen op grote oppervlakken een klein beetje af. Beschermfolie verminderd de rookaanslag van vlakgraveren. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNabewerking\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGoed geschikt om te bewerken: tekeningen of prints hechten goed. Het materiaal kan met een mes of schaar bewerkt worden of met alleslijm of houtlijm verlijmd. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUiterlijk\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"box-sizing: border-box;\" data-sheets-userformat='{\"2\":14780,\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":3,\"14\":[null,2,0],\"15\":\"Calibri\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"\u0026gt; Verkrijgbaar in verschillende afmetingen: 900x600mm, 600x600mm, 600x300mm, 900x300mm, 300x300mm\\n\u0026gt; Sterk, buigzaam materiaal met een hoge slijtvastheid.\\n\u0026gt; Gladde afwerking, splintert niet\\n\u0026gt; Overschilderbaar, er wordt aangeraden dit in meerdere lagen te doen.\"}'\u003eDe platen zijn glad en hebben een natuurlijke witte afwerking. De kern van het materiaal is bruin na het lasersnijden.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":51193151160667,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/files\/houtkarton-wit-3219675.png?v=1755453574"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/collections\/materialen-352905.png?v=1715596168","url":"https:\/\/laserlokaal.nl\/en\/collections\/all-materials\/5mm.oembed","provider":"Het Laser Lokaal","version":"1.0","type":"link"}