{"title":"All materials","description":"","products":[{"product_id":"acrylaat-zwart","title":"Acrylic Black","description":"\u003cp\u003eBlack acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, opaque plastic. The material is available in various colors, UV resistant and suitable for both indoor and outdoor use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBlack acrylic has many applications, mainly in decorative industries. Acrylic can be found in display cases, interior construction, displays, facade advertising, (name) signs and models.\u003c\/p\u003e\n\u003cp\u003eBecause the material has a high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a substitute for glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracking or breaking. Also, acrylic in thin or long strips is relatively fragile and susceptible to warping due to the heat released during cutting; take this into account in the design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, fully protecting the sheets before, during and after cutting. The cut is clean, sharp and the same color as the material. Engraved areas have a slightly whiter color compared to the material.\u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If the design contains engraving areas, we must remove the film from the top side; in some cases, a small amount of smoke may mark the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded, milled and bent afterwards. For each process, it is important to consider that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks may occur in some cases.\u003c\/p\u003e\n\u003cp\u003eTo give line and area engravings a greater contrast, they can be filled with paint (color fill). If the excess paint is then removed, the paint remains in the grooves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDepending on whether the design contains engraved areas, the material has protective film on both the front and back, or only on the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e\n\u003cp\u003eAcrylic has a slight surface sheen, and area engravings have a matte white appearance. Engraved lines are clearly visible up close. All parts are securely packed in a box and, if necessary, supported with wood.\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29216681951330,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-wit","title":"Acrylic White","description":"\u003cp\u003eWhite acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, almost completely opaque plastic. The material is very stiff and brittle compared to other plastics. White acrylic is UV resistant and suitable for both indoor and outdoor use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhite acrylic has many applications, mainly in decorative industries. Acrylic can be found in display cases, interior construction, displays, facade advertising, (name) signs and models, among other things.\u003c\/p\u003e\n\u003cp\u003eBecause the material has high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a replacement for glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. Also, acrylic in thin or long strips is relatively brittle and susceptible to warping due to the heat released during cutting; keep this in mind in the design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, which fully protects the sheets before, during and after cutting. The cut is clean, sharp and the same color as the material. Engraved areas have a slightly matte color compared to the material.\u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If the design contains engraved areas, we must remove the film from the top, in some cases this may result in a small amount of smoke residue on the material.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eKerf width\u003c\/td\u003e\n\n\u003ctd\u003e0.2mm \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e±0.05mm)\u003c\/span\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSmallest included shape\u003c\/td\u003e\n\n\u003ctd\u003e6x6mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSmallest detail (engraving)\u003c\/td\u003e\n\n\u003ctd\u003e1mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaximum size\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\u003ctd\u003e120x60cm (up to 250x130cm possible on request)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAdditional options\u003c\/td\u003e\n\n\u003ctd\u003e\u003cspan\u003eDouble-sided adhesive film\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not require post-processing. The material can be glued, printed, sawn, sanded, milled, and bent afterwards. For each operation, it is important to take into account that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks can sometimes occur.\u003c\/p\u003e\n\u003cp\u003eTo give line and area engravings greater contrast, they can be filled with paint (color fill). If the excess paint is then removed, the paint remains in the grooves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDepending on whether the design contains engraved areas, the material has protective film on both the front and back or only on the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e\n\u003cp\u003eAcrylic has a slight surface gloss; area engravings have a matte white appearance. Engraving lines and areas are quite visible up close. All parts are securely packed in a box and, if necessary, supported with wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDensity\u003c\/td\u003e\n\n\u003ctd\u003e1.2 grams \/ cm3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eThickness tolerance\u003c\/td\u003e\n\n\u003ctd\u003e\u0026lt;15%\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUV resistant\u003c\/td\u003e\n\n\u003ctd\u003eYes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAcrylic type\u003c\/td\u003e\n\n\u003ctd\u003eCast\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29216908509282,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-spiegel-goud","title":"Acrylic mirror gold","description":"\u003cp\u003eMirror acrylic (PMMA) has a reflective surface on one side and reflects light just like a normal mirror. Additionally, the material is lighter than a glass mirror, making it an excellent replacement for a glass mirror.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMirror acrylic has many applications, primarily in decorative industries. Acrylic can be found in display cases, interior design, displays, facade advertising, (name) signs, and models, among other things. \u003c\/p\u003e\n\u003cp\u003eBecause the material has high impact resistance and is 25 times stronger and 50% lighter than glass, it is often used as a glass substitute. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. \u003cspan\u003eAlso, acrylic in thin or long strips is relatively brittle and susceptible to warping due to the heat released during cutting; keep this in mind in the design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMirror acrylic has protective film on the front, ensuring the mirror is fully protected before, during, and after cutting. The cut is clean, smooth, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf the design includes line or surface engravings, the entire design will be cut and engraved in reverse on the back (the design does not need to be mirrored for this; we will do it). Engravings are standardly done on the back of the mirror in reverse to prevent reflection of the engraving. Engraving on the front is also possible, which creates a 3D effect because the engraving is also reflected. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can subsequently be glued, printed, sawn, sanded, milled, and bent. With every process, it is important to consider that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks may occur in some cases. \u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material always has protective film on the front; there is no protective film on the back. Engraving lines and surfaces are engraved from the back (in the mirror layer). The material is scratch-sensitive without protective film.\u003c\/p\u003e\n\u003cp\u003eMirror acrylic reflects like a normal mirror; surface and line engravings have a matte white appearance and a slight 3D effect. All parts are securely packed in a box and, if necessary, supported with wood. \u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235358105698,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-spiegel-zilver","title":"Acrylic mirror silver","description":"\u003cp\u003eMirror acrylic (PMMA) has a reflective surface on one side and reflects light just like a normal mirror. In addition, the material is lighter than a glass mirror, making it an excellent replacement for a glass mirror.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMirror acrylic has many applications, mainly in decorative industries. Acrylic can be found in display cases, interior design, displays, facade advertising, (name) signs, and scale models, among other things. \u003c\/p\u003e\n\u003cp\u003eBecause the material has high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a replacement for glass. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to consider the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. \u003cspan\u003eAlso, acrylic in thin or long strips is relatively fragile and sensitive to warping due to the heat released during cutting, keep this in mind in the design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMirror acrylic has protective film on the front, fully protecting the mirror before, during, and after cutting. The cut is clean, smooth, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf the design includes line or surface engravings, the entire design will be cut and engraved in reverse on the back (the design does not need to be mirrored for this, we will do it). Engravings are standard done on the back of the mirror in reverse to prevent reflection of the engraving. Engraving on the front is also possible, which creates a slight 3D effect because the engraving is also reflected. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can subsequently be glued, printed, sawn, sanded, milled, and bent. For each operation, it is important to consider that the cutting process puts pressure on the cutting edge; if the acrylic is subsequently processed, small cracks may occur in some cases. \u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). If the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material always has protective film on the front; there is no protective film on the back. Engraving lines and areas are engraved from the back (in the mirror layer). The material is scratch-sensitive without protective film.\u003c\/p\u003e\n\u003cp\u003eMirror acrylic reflects like a normal mirror; surface and line engravings have a matte white appearance and a slight 3D effect. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":49444506665307,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-licht-opaal","title":"Light opal acrylic (translucent)","description":"\u003cp\u003eLight opal acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, translucent plastic. The material is UV resistant and suitable for both indoor and outdoor use. The material is not transparent, but allows enough light to pass through for shapes of objects to be visible. Light opal acrylic is also known as privacy acrylic. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLight opal acrylic has many applications, mainly in decorative industries. Tinted acrylic can be found in display cases, interior design, displays, facade advertising, (name) signs, and models, among other things. \u003c\/p\u003e\n\u003cp\u003eBecause the material has high impact resistance and is 25 times stronger and 50% lighter than glass, it is often used as a glass substitute. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. \u003cspan\u003eAlso, acrylic in thin or long strips is relatively brittle and susceptible to warping due to the heat released during cutting; keep this in mind in the design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, so the sheets are fully protected before, during, and after cutting. The cut is clean, smooth, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If the design contains engraved areas, we must remove the film from the top side; in some cases, a small amount of smoke may deposit on the material. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can subsequently be glued, printed, sawn, sanded, milled, and bent. For any processing, it is important to consider that the cutting process puts pressure on the cutting edge, and if the acrylic is then processed, small cracks may sometimes occur. \u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on whether there are engraved areas in the design,\u003c\/span\u003e the material has protective film on both the front and back, or only on the back. Without protective film, the material is susceptible to scratches.\u003c\/p\u003e\n\u003cp\u003eLight opal acrylic has a slight surface gloss and is translucent. Surface engravings have a matte white appearance, and engraving lines are clearly visible up close. All parts are packed securely in a box and, if necessary, supported with wood. \u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235382321250,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"kurk","title":"Cork","description":"\u003cp\u003eCork is a porous, light, and elastic material. In addition to being compressible to 30% of its original volume, the material is also antistatic, moisture-resistant, and fire-resistant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause cork largely consists of air, it is an ideal material for thermal and acoustic insulation. Furthermore, the material is also highly suitable for use as a base material for notice boards, decoration, coasters, and waterproof closures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDuring cutting, a significant amount of soot builds up on the cut edge. Line and area engravings have a minimal amount of residue. Due to the structure of cork, protective film does not adhere well, so this is not an option for this material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCork can be subsequently processed by sawing, drilling, cutting, and gluing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe cut lines have residue on the top, bottom, and edge. Engraved surfaces and cut lines are black with minimal residue on the material.\u003c\/span\u003e All parts are firmly packed in a box to minimize the risk of damage. \u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235604422754,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"golfkarton-3-mm","title":"Corrugated cardboard","description":"\u003cp\u003eCorrugated cardboard is a material composed of thin cardboard sheets with a ribbed structure in between. Because the material consists of only a few thin sheets, cardboard can be cut very quickly by the laser cutter, resulting in relatively low cutting costs.\u003c\/p\u003e\n\u003cp\u003eWe have 2 different types of corrugated cardboard: 3mm B-flute corrugated cardboard (single-wall) and 7mm BC-flute corrugated cardboard (double-wall). For the 3mm corrugated cardboard sheets, the opening of the flutes is on the short side of the sheet. For BC-flute corrugated cardboard, it is on the long side. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrugated cardboard is a construction material frequently found in displays, promotional items, packaging, and 3D models. A major advantage of cardboard is that it can be easily printed before or after processing.\u003c\/p\u003e\n\u003cp\u003eBecause the material and processing are relatively inexpensive compared to other materials, it is often used for prototypes. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrugated cardboard is most suitable for cutting; line engravings are also possible, but due to the power of the laser cutters, the engraving lines can sometimes penetrate the material a little.\u003c\/p\u003e\n\u003cp\u003eArea engraving is possible, but not recommended due to the wavy core. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrugated cardboard is cut very quickly, leaving very little soot residue on the cut. The edges can optionally be wiped with a dry cloth. No protective film can be applied to cardboard. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrugated cardboard generally does not require post-processing; any small amount of soot on the cutting edge can be removed with a dry cloth or compressed air. The material is suitable for subsequent painting, printing, or gluing with wood glue or all-purpose adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"box-sizing: border-box;\" data-sheets-userformat='{\"2\":14780,\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":3,\"14\":[null,2,0],\"15\":\"Calibri\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"\u0026gt; Verkrijgbaar in verschillende afmetingen: 900x600mm, 600x600mm, 600x300mm, 900x300mm, 300x300mm\\n\u0026gt; Sterk, buigzaam materiaal met een hoge slijtvastheid.\\n\u0026gt; Gladde afwerking, splintert niet\\n\u0026gt; Overschilderbaar, er wordt aangeraden dit in meerdere lagen te doen.\"}'\u003eThe sheets are brown and have a smooth surface; in some cases, the flutes are slightly visible. Due to internal tension, the sheets may be slightly curved. \u003c\/span\u003e\u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"B flute (single) 3mm","offer_id":50165664219483,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"BC golf (double) 7mm","offer_id":50165664252251,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"kraftplex","title":"Kraftplex","description":"\u003cp\u003e\u003cspan\u003eKraftplex is a material made from 100% compressed wood fibres and is therefore completely biodegradable. This thin, ecological and flexible material is almost indestructible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eApplications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its thickness and composition, Kraftplex can be cut with great precision. The material is widely used in model building, small packaging, business cards, stencils and templates. \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLaser cutting\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDiscoloured edges, which are unavoidable, occur during laser cutting. This discolouration ranges from dark brown to black. Surface engravings are also dark brown. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAppearance\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material has a warm brownish colour reminiscent of MDF but is smoother than MDF. On the outside of the Kraftplex, a subtle geometric pattern can be felt\/seen, giving the material a unique character. The material has no grain direction. Kraftplex can have different shades of brown per sheet.\u003c\/span\u003e\u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235619037282,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"berken-multiplex","title":"Birch plywood","description":"\u003cp\u003eBirch plywood is an all-round sheet material constructed from thin layers of birch veneer. The material is strong and light in color. We supply B\/BB quality plywood, which means that the front may have small knots and patches, and the back may have slightly larger knots and patches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBirch plywood is one of our most popular materials because it is strong and durable. The material is often found in packaging, enclosures, scale models, (name) signs, prototypes, jewelry, and furniture and interior construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease note the thickness tolerance when designing finger and slot joints. Birch plywood has a grain direction, which is generally horizontal for a full sheet, but can also be vertical depending on how the sheet is cut. If the grain direction is important, this must be indicated in advance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut edges of birch plywood turn brown\/black. Smoke residue will be present around the cut on the top and bottom of the material; \u003cspan\u003ethis can largely be prevented by protective film. Any remaining smoke residue on the material can be easily removed with sandpaper.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePost-processing of birch plywood is not necessary; if desired, the sheet material can be sanded with 400 grit sandpaper for a smooth finish. Birch plywood can be painted, glued, sawn, drilled, and sanded, either before or after. \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBirch plywood is very light brown in color; cut edges and surface and line engravings are dark brown and leave (almost) no residue. Each sheet is almost entirely flawless on the front, with slightly more knots and patches on the back. Due to the production process, the density may vary slightly.\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235623100514,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"zwart-mdf","title":"Black MDF","description":"\u003cp\u003eBlack MDF is a variant of regular MDF where black dye is added to the material during the production process, making the material black throughout. A significant advantage of black MDF is that the cut lines have the same color as the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003eThe applications of black MDF are virtually the same as regular MDF, often for constructive purposes such as furniture construction, interior design, and model building. Additionally, the material is very popular for its aesthetic properties and combines well with acrylic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLike other wood types, black MDF has smoke residue on the top and bottom of the material around the cut and engravings after laser cutting; this smoke residue is virtually invisible due to the color of the material. The cut and engraving have the same color as the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMDF can be easily mechanically post-processed by sawing, drilling, milling, and sanding. The material can also be painted. When applying paint, it is important to consider the moisture-absorbing properties of MDF; multiple primer layers are often necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMDF is black throughout, has a smooth surface, and does not splinter. The material absorbs water very easily and is therefore not suitable for damp environments. \u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235626901602,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"hardboard","title":"Hardboard","description":"\u003cp\u003eHardboard, also known as high-density fiberboard (HDF), is a hard, thin panel made by compressing wood fibers under high pressure. This process gives the material a relatively high density. Hardboard is recognizable by its brown color and high density.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the panels are thin and relatively inexpensive, hardboard is suitable for prototypes, coverings, packaging, furniture construction, hobby projects, and protection, among other uses.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the production process, the material retains a black residue on and around the cut. This residue hardly transfers. Protective film reduces residue on the surface of the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHardboard can be easily post-processed mechanically by sawing, drilling, milling, and sanding. The material can also be painted; when applying paint, it is important to consider its moisture-absorbing properties, as multiple primer coats are often necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHardboard is brown in color, both sides have a smooth surface and do not splinter. The material absorbs water very easily and is therefore not suitable for humid environments. \u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235637452898,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"laser-rubber","title":"Laser rubber grey","description":"\u003cp\u003eLaser rubber is a grey rubber specifically developed for laser cutting. The material is stretchable and flexible and can be laser cut and engraved with high precision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLaser rubber is highly suitable for making stamps, bumper strips, and (waterproof) seals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen designing stamps, it is important that the design is created in negative, as the parts that need to be stamped should not be removed. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLaser rubber does not retain residue after cutting, although in some cases a small amount of dust may remain in the engravings. Laser rubber can be engraved with very high precision. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis material can be cut with a sharp knife and bonded with a suitable contact adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLaser rubber is dark grey in color, and engraved areas are light grey. Dust from the production process may remain on the material (mainly in the engravings). This can be easily removed with a wet brush. \u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235644891234,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"pe-hardschuim","title":"PE rigid foam","description":"\u003cp\u003ePolyethylene (PE) foam is a material consisting of closed air cells. This ensures that the material offers excellent protection. The foam is about as hard as packaging foam; we also supply a softer variant (soft foam).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe application area of PE foam is mainly for case inlays and for protecting objects. In addition, the material is also very suitable for logos, wall ornaments, and layered sculptures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFoam has a relatively large kerf; as a rule of thumb, the thicker the material, the wider the kerf. \u003cspan data-mce-fragment=\"1\"\u003eFlat engraving is possible and is relatively deep (1-2 millimeters)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material retains a clean cut without residue after laser cutting. The cut looks approximately the same as the material itself, but the cut is slightly angled. The foam is a little stretchy; we try to load the material into the laser as carefully as possible without tension, but it is possible that a component that is \"relaxed\" may deviate slightly from the actual size.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProtective film and double-sided adhesive film are not possible. Cut parts may have a small amount of black flashback from the laser bed on the underside of the material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePE foam can be processed with a knife or hot-knife after laser cutting. The foam can also be painted or glued with spray adhesive or contact adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHard foam feels soft (for comparison, as soft as mattress foam) and is light grey in color. The cut is colorless and feels the same as unprocessed material.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235648987234,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"pe-zachtschuim","title":"PE soft foam","description":"\u003cp\u003ePolyethylene (PE) soft foam is a material consisting of closed air cells. This property ensures that the material offers excellent protection. This foam is about as hard as mattress foam; we also offer a harder variant (hard foam).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003eThe application area for PE foam is mainly for case inlays and for protecting objects. Additionally, the material is also very suitable for logos, wall ornaments, and layered sculptures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFoam has a relatively wide kerf; as a rule of thumb, the thicker the material, the wider the kerf. Surface engraving is possible and is relatively deep (1-2 millimeters).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material retains a clean cut without residue after laser cutting. The cut looks approximately the same as the material itself, but the cut is slightly angled. The foam is somewhat stretchable; we try to load the material into the laser as carefully as possible without tension, but it is possible that a \"relaxed\" component may deviate slightly from the actual size.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProtective film and double-sided adhesive film are not possible. Cut parts may have a small amount of black flashback from the laser bed on the underside of the material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSoft foam can be worked with a knife or hot-knife after laser cutting. The foam can also be painted or glued with spray adhesive or contact glue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSoft foam feels soft (for comparison, as soft as mattress foam) and is dark gray\/black in color. The cut is colorless and feels the same as unprocessed material. However, the cuts can be a bit sticky due to melting of the material.\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":29235654262882,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"polyacetaal-1","title":"Polyacetal (Delrin) (POM)","description":"\u003cp\u003ePolyacetal, also known as Polyoxymethylene, POM, and under the brand name Delrin, is a hard plastic with a milky white appearance. The plastic is highly sought after in the industrial sector due to its wear resistance and low coefficient of friction. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe application area of polyacetal is quite specific; the material is mainly found in (small) machine building, installation construction, and other low-stress industrial fields. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGenerally, this material is only cut, as line and area engravings are almost invisible. Due to the production process, the material may warp slightly. This is also the case with thin or long strips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut is neat, clean, and the same color as the material. Engraved areas and lines are the same color as the material. There will be smoke residue around the cut and a very small melted edge; this can be prevented on both sides with protective film. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the chemical composition of polyacetal, almost all glues do not adhere to the material. Fastening is almost exclusively possible with bolts and screws. However, the material is excellent for sawing, sanding, milling, and drilling.\u003c\/p\u003e\n\u003cp\u003eTo give line and area engravings greater contrast, they can be filled with paint (color fill). If the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material is opaque, with thinner variants more so than thicker ones. Engraved areas and lines are almost invisible, and there may be small scratches on the material because it is produced without protective film. Without protective film, there will be a granular amount of smoke residue on the top and bottom.\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"White","offer_id":31241505407109,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":54046261018971,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false}]},{"product_id":"eva-schuim","title":"EVA foam","description":"\u003cp\u003eEthylene-vinyl acetate (EVA) foam is a material with a relatively high density. Unlike other types of foam, the air cells are barely visible in the material, and it feels almost rubbery. This foam also does not absorb water and is UV resistant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe application area of EVA foam is diverse. Because the material can be processed in many ways, it is often found in the production of costumes and props. The material can also be used in the form of floor tiles for protection and sound dampening or even as wall decoration. Finally, the material can be found in \"rough\" model building and dioramas, for example, as a base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFoam has a relatively large kerf; as a rule of thumb, the thicker the material, the wider the kerf. Small details (less than 5mm) should be avoided for this reason.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material maintains a clean cut without residue after laser cutting; the cut is slightly darker than the material. The foam is a bit stretchy, and we try to load the material into the laser as carefully as possible without tension, but it may be that a \"relaxed\" part deviates slightly from the actual size. Engravings are relatively deep and feel hard, as if the material has melted.\u003c\/p\u003e\n\u003cp\u003eDouble-sided adhesive film is not possible. Cut parts may have \"pits\" and black blowback from the laser bed on the underside of the material; this can be prevented with protective film.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, EVA foam can be worked with a knife, Dremel, or hot-knife. The foam can also be painted, sanded, shaped, or glued with contact adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEVA feels soft (for comparison, as soft as a yoga mat) and is white in color. The cut is slightly darker than the material. The material can be easily bent. The color of EVA foam is off-white.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31635740688517,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"silicone-rubber-rood","title":"Silicone rubber red (food safe)","description":"\u003cdiv id=\"materialLoad\"\u003e\u003c\/div\u003e\u003cp\u003eSilicone rubber is a type of rubber that is easy to cut and remains stretchable and flexible. It can be cut with great precision. This variant is food-safe. The material is resistant to temperatures up to 220 degrees, water-repellent, insulating, and UV resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSilicone rubber is often found in the pharmaceutical, medical, and food industries in the form of closures, (baking) molds, and applications where elasticity is important.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere are no restrictions on designing; the material can be engraved with very high precision. Engravings have little contrast but can be used, for example, for negatives in baking molds.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSilicone rubber does not retain permanent residue after cutting, but a dusty\/ashy residue does form, which can be washed off. Because the material is flexible, the dimensions of certain parts may differ slightly in reality compared to the design.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis material can be cut with a sharp knife. The material should be thoroughly washed after processing if the application involves food.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSilicone rubber is red in color; engraved parts have the same color as the material. Residue from the production process may remain on the material (mainly in the engravings and cuts). This can be easily removed with alcohol or a wash cycle in the washing machine. \u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31639095279749,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"silicone-rubber-transparant","title":"Silicone rubber translucent","description":"\u003cp\u003eSilicone rubber is a type of rubber that is easy to cut and remains stretchable and flexible. The material can be cut with high precision. It is resistant to temperatures up to 220 degrees Celsius, water-repellent, insulating, and UV resistant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSilicone rubber is commonly found in the pharmaceutical, medical, and food industries, primarily in applications where elasticity is important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are no restrictions when designing; the material can be engraved with very high precision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSilicone rubber does not retain discoloration after cutting, although in some cases, a small amount of residue may remain along the cut and in the engravings. Because the material is flexible, the dimensions of certain parts may differ slightly in reality compared to the design. Engravings have low contrast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis material can be cut with a sharp knife.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSilicone rubber is milky white in color; engraved parts have the same color as the material. Residue from the production process may remain on the material (mainly in the engravings and cuts). This can be easily removed with alcohol or a wash cycle in the washing machine.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31640208310405,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"okoume-multiplex-watervast","title":"Okoume plywood (waterproof)","description":"\u003cp\u003eOkoumé plywood is a constructive sheet material made of thin layers of Okoumé veneer. The material is sturdy and relatively dark in color. On the front of the material, knots and plugs may occur, on the back, the transition between different veneer layers may be visible. We place the most aesthetically pleasing side face-up in the machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOkoumé plywood is a good alternative to birch plywood because the material has waterproof properties without finishing. When the material is extra protected with a paint or stain layer, the material is suitable for permanent outdoor use. The material is therefore often found in humid or exterior applications such as (wall) signs, facade cladding, and furniture construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePay attention to thickness tolerance when designing finger and slot joints. Okoumé plywood has a grain direction, which is generally horizontal for a full sheet, but can also be vertical depending on how the sheet is cut. If the grain direction is important, this should be specified in advance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut edges of Okoumé plywood turn brown\/black. On the top and bottom of the material, there will be smoke residue around the cut, \u003cspan\u003ethis can largely be prevented by protective film. Any smoke residue remaining on the material can be easily removed with sandpaper.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePost-processing Okoumé plywood is not necessary, but recommended. The material can optionally be sanded with 400 grit sandpaper for a smooth finish. The material can be painted, glued, sawn, drilled, and sanded, either afterward or beforehand.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOkoumé plywood is reddish-brown in color, cut edges and surface and line engravings are dark brown and hardly rub off. The material is of a constructive nature, and for this reason, some knots and plugs may be present on the front, while on the back, the transition between different sheets may be visible. \u003c\/span\u003e\u003cspan\u003eDue to the production process, the density may vary somewhat. \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31648272187525,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"vibers-bioplastic","title":"Fibernyl bioplastic","description":"\u003cp\u003eFibernyl (Vibers) bioplastic is made from elephant grass (Miscanthus giganteus), PLA and starch from a waste stream of the Dutch potato industry. Elephant grass is a very sustainable crop that grows in the Netherlands, captures 4 times more CO2 than trees, and requires no irrigation, fertilizers or pesticides. Advantages of Fibernyl bioplastic include: low CO2 footprint, biobased, biodegradable, natural look \u0026amp; feel. The material was designed and produced in the Netherlands and is available in 3 colours: white, black and brown (natural).\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eApplications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eFibernyl bioplastic is an excellent decorative replacement for regular plywood. The material can be found in luxury packaging, POS materials and displays, signage, interior applications and labels.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLaser cutting\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material cuts like regular plastic, the cut is clean and neat. This also applies to surface engravings. The cutting process can cause residue on the underside of the material; this can be prevented with protective film. Residue on the top side mainly occurs due to surface engravings, but cutting and engraving lines also contribute to this. Residue on the top side of the material can be prevented by protective film on the top side. The yellow residue is most visible on the white variant and can be removed by sanding.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAppearance\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material basically has a light brownish colour with clear fibres and may differ slightly in colour from what is shown in the photo, this is due to the production process of the material. In addition, post-processed colours black and white are available, both of which are coloured through and through.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material is slightly rough on one side and smooth on the underside. The material is pliable and feels like flexible plastic.\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Bruin","offer_id":50173791371611,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Zwart","offer_id":50173791404379,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Wit","offer_id":50173791437147,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"massief-karton-grijs","title":"Solid board grey","description":"\u003cp\u003eSolid board is a material made from compressed paper fibers. This type is manufactured with 100% recycled fibers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolid board is a construction material often found in displays, promotional items, packaging, carton packaging, and 3D models.\u003c\/p\u003e\n\u003cp\u003eBecause the material and processing are relatively inexpensive compared to other materials, it is often used for prototypes. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when designing with greyboard. Due to the fibrous nature of the material, small parts can tear or break. It is therefore recommended to avoid long or thin parts as much as possible. Surface engravings are possible, but this results in a large amount of black residue. This can be prevented by using protective film on the front of the material. \u003cspan data-mce-fragment=\"1\"\u003eWithout protective film on the underside, the material can get a small amount of black flashback from the laser bed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolid board can be cut relatively quickly. A black residue that rubs off remains on the cut; this can be wiped off with a dry cloth. \u003c\/p\u003e\n\u003cp\u003eEngraving lines and surfaces are dark brown to black and rub off slightly. Protective film reduces smoke stains from surface engraving. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, solid board can be wiped down to remove loose residue. The material can be processed with a knife or scissors or glued with all-purpose glue or wood glue. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"\u0026gt; Verkrijgbaar in verschillende afmetingen: 900x600mm, 600x600mm, 600x300mm, 900x300mm, 300x300mm\\n\u0026gt; Sterk, buigzaam materiaal met een hoge slijtvastheid.\\n\u0026gt; Gladde afwerking, splintert niet\\n\u0026gt; Overschilderbaar, er wordt aangeraden dit in meerdere lagen te doen.\"}' data-sheets-userformat='{\"2\":14780,\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":3,\"14\":[null,2,0],\"15\":\"Calibri\",\"16\":11}' style=\"box-sizing: border-box;\"\u003eThe sheets are grey with a clear fibrous structure and have a smooth surface. \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31694461894789,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-melkwit","title":"Acrylic milky white opal (translucent)","description":"\u003cp\u003eOpal acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, semi-transparent plastic. In normal light, the material looks very similar to regular acrylic, but when the sheet is backlit (for example, in a light box or logo), the light is \u003cspan\u003ediffused (scattered)\u003c\/span\u003e within the sheet, resulting in a soft spread of light. The material is UV resistant and suitable for both indoor and outdoor use. The sheet has a transmission of ~32%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpal acrylic has many applications, mainly in decorative industries. Acrylic can be found in display cases, interior design, displays, facade advertising, and (name) signs, among other things. In combination with (different colored) lights, the material is very attractive. \u003c\/p\u003e\n\u003cp\u003eBecause the material has high impact resistance and is 25 times stronger and 50% lighter than glass, it is often used as a glass substitute. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. \u003cspan\u003eAcrylic in thin or long strips is also relatively fragile and susceptible to warping due to the heat released during cutting; please consider this in the design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, so the sheets are fully protected before, during, and after cutting. The cut is clean, smooth, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If the design contains engraved areas, we must remove the film from the top side; in some cases, a small amount of smoke residue may appear on the material. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not require post-processing due to the high quality of the material. The material can be subsequently glued, printed, sawn, sanded, milled, and bent. For each process, it is important to consider that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks may occur in some cases. \u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). When the excess paint is subsequently removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on whether there are engraved areas in the design\u003c\/span\u003e, the material has protective film on both the front and back or only the back. Without protective film, the material is scratch-sensitive. \u003c\/p\u003e\n\u003cp\u003eAcrylic has a slight surface sheen; surface engravings have a matte white appearance. Engraving lines are clearly visible up close. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31712431669381,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"mylar-folie","title":"Mylar film","description":"\u003cp\u003eMylar film is a very thin type of film that can be used, for example, to make stencils. The film is completely transparent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003eMylar film is often used in model building, airbrushing, or murals. Use repositionable spray adhesive to make Mylar stencil material self-adhesive and secure it.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material is only suitable for cutting; (surface) engravings are not possible. Because the material is very thin, shapes can be cut out very precisely. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut is clean, sharp, and leaves no residue. Without a protective film, the underside of the material may show slight black blowback from the laser bed. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis material can be cut or trimmed with a sharp knife or scissors. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMylar film is a very thin, flexible, and transparent type of film with a slight surface sheen. We do not recommend using this type of film outdoors for extended periods.\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31771030061189,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-satijn-transparant","title":"Acrylic matt transparent","description":"\u003cp\u003eTransparent satin acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, semi-transparent plastic. The material has a finely matted surface on both sides. The matted surface feels and looks sandblasted, but the effect is obtained during the casting process and results in a less \"sharp\" texture than with sandblasted surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTransparent satin acrylic has many applications, mainly in decorative industries. This acrylic can be found in showcases, interior design, displays, facade advertising, (name) signs, and models. \u003c\/p\u003e\n\u003cp\u003eIt is very beautiful to use with LED lighting, as the translucent light is softly diffused.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to consider the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. Also, acrylic in thin or long strips is relatively fragile and sensitive to warping due to the heat released during cutting; take this into account in the design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, fully protecting the sheets before, during, and after cutting. The cut is clean, smooth, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If the design contains engraved areas, we must remove the film from the top side, in which case a small amount of smoke may adhere to the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need to be post-processed due to the high quality of the material. The material can be glued, printed, sawn, sanded, milled, and bent afterwards. For each operation, it is important to consider that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks can sometimes occur.\u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). If the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on whether there are engraved areas in the design,\u003c\/span\u003e the material has protective film on both the front and back or only the back. The material is susceptible to scratches without protective film.\u003c\/p\u003e\n\u003cp\u003eTransparent satin acrylic has a matte\/satin surface on both sides of the material. Surface engravings have a matte white appearance. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e\n\u003ctable style=\"width: 530px;\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\n\u003ccolgroup\u003e \u003ccol width=\"64\"\u003e \u003ccol width=\"83\"\u003e \u003ccol width=\"41\"\u003e \u003ccol width=\"99\"\u003e \u003c\/colgroup\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd style=\"width: 69px;\" data-sheets-value='{\"1\":2,\"2\":\"Dichtheid\"}'\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 105px;\" data-sheets-value='{\"1\":2,\"2\":\"Diktetolerantie\"}'\u003e\u003cstrong\u003eThickness tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 106px;\" data-sheets-value='{\"1\":2,\"2\":\"Snedebreedte\"}'\u003e\u003cstrong\u003eKerf width\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 129px;\" data-sheets-value='{\"1\":2,\"2\":\"Snedebreedte\"}'\u003e\u003cstrong\u003eType of acrylic\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd style=\"width: 69px;\" data-sheets-value='{\"1\":2,\"2\":\"1.2\"}'\u003e1.2 g\/cm\u003c\/td\u003e\n\n\u003ctd style=\"width: 105px;\" data-sheets-value='{\"1\":2,\"2\":\"\u0026lt;0.1mm\"}'\u003e\u0026lt;15%\u003c\/td\u003e\n\n\u003ctd style=\"width: 106px;\" data-sheets-value='{\"1\":2,\"2\":\"0.2 mm\"}'\u003e0.2 mm\u003c\/td\u003e\n\n\u003ctd style=\"width: 129px;\" data-sheets-value='{\"1\":2,\"2\":\"0.2 mm\"}'\u003eCast\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":31779596992645,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-satijn-dekkend-wit","title":"Acrylic Matte White","description":"\u003cp\u003eWhite opaque matte acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, opaque plastic. The material has a finely matted surface on both sides. The matted surface feels and looks sandblasted, but the effect is achieved during the casting process and results in a less \"sharp\" texture than with sandblasted surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSatin acrylic has many applications, mainly in decorative industries. This acrylic can be found in display cases, interior design, displays, facade advertising, (name) signs, and architectural models, among other things. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. Also, acrylic in thin or long strips is relatively fragile and susceptible to warping due to the heat released during cutting; keep this in mind in the design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, ensuring the sheets are fully protected before, during, and after cutting. The cut is clean, smooth, and the same color as the material. Engraving areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If the design contains engraving areas, we must remove the film from the top side, in which case a small amount of smoke may mark the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can be glued, printed, sawn, sanded, milled, and bent afterwards. With every process, it is important to consider that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks may occur in some cases. \u003c\/p\u003e\n\u003cp\u003eTo give line and area engravings greater contrast, they can be filled with paint (color fill). If the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on whether there are engraving areas in the design,\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ethe material has protective film on both the front and back or only the back. The material is susceptible to scratches without protective film.\u003c\/p\u003e\n\u003cp\u003eSatin acrylic has a matte\/satin surface on both sides of the material. Area engravings have a matte white appearance. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50284510183771,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-satijn-dekkend-zwart","title":"Acrylic Matt Black","description":"\u003cp\u003eBlack opaque matte acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, opaque plastic. The material has a finely matted surface on both sides. The matted surface feels and looks sandblasted, but the effect is achieved during the casting process and results in a less \"sharp\" texture than sandblasted surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSatin acrylic has many applications, mainly in decorative industries. This acrylic can be found in display cases, interior design, displays, facade advertising, (name) signs, and models, among other things.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. Also, acrylic in thin or long strips is relatively brittle and susceptible to warping due to the heat released during cutting; keep this in mind in the design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, fully protecting the sheets before, during, and after cutting. The cut is clean, smooth, and the same color as the material. Engraved areas have a slightly whiter color compared to the material.\u003c\/p\u003e\n\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If the design contains engraved areas, we must remove the film from the top side, in which case a small amount of smoke may accumulate on the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can subsequently be glued, printed, sawn, sanded, milled, and bent. With each process, it is important to consider that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks may occur in some cases.\u003c\/p\u003e\n\u003cp\u003eTo give line and area engravings greater contrast, they can be filled with paint (color fill). When the excess paint is subsequently removed, the paint remains in the grooves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on whether there are engraved areas in the design,\u003c\/span\u003e the material has protective film on both the front and back, or only on the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e\n\u003cp\u003eSatin acrylic has a matte\/satin surface on both sides of the material. Area engravings have a matte white appearance. All parts are securely packed in a box and, if necessary, supported with wood.\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50284510151003,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"transparant-acrylaat","title":"Acrylic Clear","description":"\u003cp\u003eTransparent acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, transparent plastic. The material is very stiff and brittle compared to other plastics. Transparent acrylic is UV resistant and suitable for both indoor and outdoor use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTransparent acrylic has many applications, mainly in decorative industries. This acrylic can be found in display cases, interior design, displays, facade advertising, (name) signs, and models, among others. \u003c\/p\u003e\n\u003cp\u003eBecause the material has high impact resistance and is 25 times stronger and 50% lighter than glass, it is often used as a glass replacement. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. Also, acrylic in thin or long strips is relatively brittle and susceptible to warping due to the heat released during cutting; keep this in mind in the design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, completely protecting the sheets before, during, and after cutting. The cut is clean, smooth, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the film on both sides. If there are engraved areas in the design, we must remove the film from the top, in some cases, a small amount of smoke may mark the material. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need to be post-processed. The material can be glued, printed, sawn, sanded, milled, and bent afterward. For each operation, it is important to consider that the cutting process puts pressure on the cutting edge, and if the acrylic is then processed, small cracks may sometimes occur. \u003c\/p\u003e\n\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (color fill). When the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDepending on whether there are engraved areas in the design, the material has protective film on both the front and back, or only the back. Without protective film, the material is susceptible to scratches.\u003c\/p\u003e\n\u003cp\u003eAcrylic has a slight surface sheen; surface engravings have a matte white appearance. Engraved lines are clearly visible up close. All parts are packed securely in a box and, if necessary, supported with wood. \u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":40705324089497,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"bruin-mdf","title":"Brown MDF","description":"\u003cp\u003eBrown MDF (medium density fibreboard) is a sheet material made by compressing wood fibres under high pressure. The material has a smooth surface and does not splinter because it has no grain direction. Due to its smooth surface, the material is very suitable for painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe applications for MDF are diverse. The material is widely used in furniture, artworks, models, and packaging, among other things. For projects that need to be painted, MDF is an excellent choice. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, there will be smoke residue on the top and bottom of the material around the cut and engravings. On both sides, the smoke residue can be prevented by protective film. The cuts are dark brown\/black and engravings are dark brown. With thin variants, the material does not stain; 6mm and 9mm give off a small amount. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMDF can be easily post-processed mechanically by sawing, drilling, milling, and sanding. The material can also be painted. When applying paint, it is important to take into account the moisture-absorbing properties of MDF; multiple primer layers are often necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMDF is brown in colour, has a smooth surface, and does not splinter. The material absorbs water very easily and is therefore not suitable for damp environments. Due to the pressing, 1mm and 2mm sheets feel mirror-smooth, while on 3mm and thicker sheets, the fibres are slightly palpable. \u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":40811801903257,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"populieren-multiplex-1","title":"Poplar plywood","description":"\u003cp\u003ePoplar plywood is one of the softer types of plywood. The material is characterized by its light weight and long lifespan. Poplar plywood can only be used indoors. The low density of this material makes it excellent for laser cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003ePoplar plywood is often found in furniture and interior construction, artworks, advertising and promotional materials, and logos. The material is also excellently suited for low-cost packaging, prototypes, and models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePay attention to thickness tolerance when designing finger and slot joints. Poplar plywood has a grain direction, which is generally vertical on a full sheet, but can also be horizontal depending on how the sheet is cut. If the grain direction is important, this should be indicated in advance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe cut edges of poplar plywood turn brown\/black and, with the thickest variant, may produce a small amount of residue. Smoke residue will be present around the cut on the top and bottom of the material; this can largely be prevented by protective film. Any remaining smoke residue on the material can be easily removed with sandpaper.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePost-processing of poplar plywood is not necessary, but the sheet material can be sanded with 400-grit sandpaper for a smooth finish. Birch plywood can be painted, glued, sawn, drilled, and sanded, either afterwards or beforehand.\u003c\/span\u003e\u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":40811894014105,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-getint-oranje","title":"Acrylic Tinted","description":"\u003cdiv id=\"materialLoadCustom\" data-material=\"Acrylaat getint geel\" data-only-material=\"\"\u003e\u003c\/div\u003e\u003cp\u003eTinted acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, transparent plastic. The material is available in various colours, is UV resistant and suitable for both indoor and outdoor use. This material is available in the colours: orange, yellow, brown, red, green, blue, grey, anthracite, dark blue, dark green, and glass-look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTinted acrylic has many applications, mainly in decorative industries. Tinted acrylic can be found in display cases, interior design, displays, facade advertising, (name) signs, and models. \u003c\/p\u003e\u003cp\u003eBecause the material has high impact resistance and is 25 times stronger and 50% lighter than glass, it is often used as a substitute for glass. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracking or breaking.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAlso, acrylic in thin or long strips is relatively fragile and susceptible to warping due to the heat released during cutting; keep this in mind in the design.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAcrylic has protective film on both sides, which fully protects the sheets before, during, and after cutting. The cut is clean, smooth, and the same colour as the material. Engraving areas have a slightly whiter colour compared to the material. \u003c\/p\u003e\u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the film on both sides. If there are engraving areas in the design, we must remove the film from the top, in some cases, a small amount of smoke may mark the material. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn principle, acrylic does not need to be post-processed due to the high quality of the material. The material can be glued, printed, sawn, sanded, milled, and bent afterwards. With every operation, it is important to take into account that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks can sometimes occur. \u003c\/p\u003e\u003cp\u003eTo give line and area engravings greater contrast, they can be filled with paint (colour fill). If the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eDepending on whether there are engraving areas in the design,\u003c\/span\u003e the material has protective film on both the front and back or only on the back. Without protective film, the material is susceptible to scratches.\u003c\/p\u003e\u003cp\u003eTinted acrylic has a slight surface gloss and is semi-transparent. Area engravings have a matte white appearance; engraving lines are clearly visible up close. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Glass","offer_id":49441508884827,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":49441508917595,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":49441508950363,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":49441509015899,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":49441509048667,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":49441509081435,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark blue","offer_id":49441509146971,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":49441509114203,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark green","offer_id":49441509179739,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark pink","offer_id":54047146639707,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Pink","offer_id":54047146672475,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Purple","offer_id":54047146705243,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false}]},{"product_id":"microgolfkarton-zwart","title":"Black micro-corrugated cardboard","description":"\u003cp\u003eBlack micro-flute cardboard (E-Flute) is a sturdy, light, thin type of cardboard characterized by its solid black color. The material consists of 2 thin cardboard sheets with a ribbed sheet in between, making it not only relatively sturdy but also quick to process. The flutes run parallel to the longest side of the sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBlack micro-flute cardboard is a constructive material often found in displays, promotional items, packaging, and 3D models. A major advantage of black corrugated cardboard is that it can be easily printed before or after processing.\u003c\/p\u003e\n\u003cp\u003eBecause the material and processing are relatively inexpensive compared to other materials, it is often used for prototypes and POS applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrugated cardboard is most suitable for cutting; line engravings are also possible, but due to the power of the laser cutters, the engraving lines can sometimes penetrate the material slightly.\u003c\/p\u003e\n\u003cp\u003eSurface engraving is possible but not recommended due to the wavy core.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrugated cardboard is cut very quickly, resulting in very little soot residue on the cut. The edges can be wiped with a dry cloth if necessary. No protective film can be applied to cardboard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrugated cardboard generally does not require post-processing; any small amount of soot on the cutting edge can be removed with a dry cloth or air pressure. The material is suitable for subsequent painting, printing, or gluing with wood glue or all-purpose glue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"box-sizing: border-box;\" data-sheets-userformat='{\"2\":14780,\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":3,\"14\":[null,2,0],\"15\":\"Calibri\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"\u0026gt; Verkrijgbaar in verschillende afmetingen: 900x600mm, 600x600mm, 600x300mm, 900x300mm, 300x300mm\\n\u0026gt; Sterk, buigzaam materiaal met een hoge slijtvastheid.\\n\u0026gt; Gladde afwerking, splintert niet\\n\u0026gt; Overschilderbaar, er wordt aangeraden dit in meerdere lagen te doen.\"}'\u003eThe sheets are black and have a smooth surface; in some cases, the flutes may be slightly visible.\u003c\/span\u003e\u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":49021386228059,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"neopreen-rubber","title":"Neoprene foam","description":"\u003cp\u003e\u003cspan\u003eNeoprene foam rubber has closed cells, making it waterproof and non-absorbent to liquids. It is resistant to contact with seawater, is flame retardant, and reasonably oil-resistant. The material is widely used in shipping and offshore industries, as well as for seals in general industry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNeoprene Cellular Rubber\u003cspan\u003e is a durable seal for water and other liquids, in aluminum and steel windows, electrical industry and partitions, industrially applicable as sound-deadening material in automotive, industry, and construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are no restrictions on design, but it is important to consider long, thin shapes. These can shift during laser cutting due to internal tension. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeoprene rubber does not retain residue after cutting. Because the material is flexible, the dimensions of certain parts may differ slightly in reality compared to the design. Engravings have little contrast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis material can be cut with a sharp knife.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeoprene rubber is dark grey\/black in color; engraved parts have the same color as the material.\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":49168447668571,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"polyester-pet-g","title":"Polyester (PET-G) transparent","description":"\u003cp\u003e\u003cspan\u003ePolyester (PET-G) sheets, also known by the brand name Vivak, are a strong yet flexible plastic. The plastic is completely transparent and very impact-resistant. The material is flexible but can be bent to permanently take on a certain angle. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePET-G is used for many different applications such as displays, poster protection, protective covers, and display cases. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePolyester has a clean, \u003cspan\u003epolished\u003c\/span\u003e cut. Line engravings are possible but not very visible; complex line engravings are not recommended. Surface engravings are not possible due to melt formation. \u003cspan\u003eAlso, polyester in thin or long strips is relatively fragile and susceptible to warping due to the heat generated during cutting; please consider this in your design. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePolyester has paper protective film on both sides, fully protecting the sheets before, during, and after cutting. The cut is clean, neat, and the same color as the material. Line engravings are the same color as the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, PET-G does not need post-processing due to the high quality of the material. \u003cspan\u003eThe processing possibilities for polyester sheets include sawing, drilling, milling, bending, and vacuum forming. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material has protective film on both the front and back. Without protective film, the material is susceptible to scratches.\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":49168965992795,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"berken-multiplex-extra-dun","title":"Birch aircraft plywood (extra thin)","description":"\u003cp\u003eBirch aircraft plywood is a flexible all-round sheet material made up of 3 thin layers of birch veneer. The material is sturdy and light in color. We supply B\/B quality plywood, meaning both sides are virtually flawless. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBirch aircraft plywood is used for applications that require (lightly) flexible wood, such as (scale) model building and dioramas, and for applications requiring thin sheet material, such as finishing work and furniture and interior construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePay attention to thickness tolerance when designing finger and slot joints. Birch plywood has a grain direction, which is generally horizontal for a full sheet, but can also be vertical depending on how the sheet is cut. If the grain direction is important, this must be indicated in advance. The sheets are bendable across the grain direction (bending direction across the short side relative to a 120x60cm sheet).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut edges of birch aircraft plywood are black and may lightly rub off. There will be smoke residue around the cut on the top and bottom of the material; \u003cspan\u003ethis can largely be prevented by protective film. Any smoke residue remaining on the material can easily be removed with sandpaper. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePost-processing of birch aircraft plywood is not necessary. If desired, the sheet material can be sanded with 400 grit sandpaper for a smooth finish. Birch plywood can be painted, glued, sawn, drilled, and sanded, either before or after processing. \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003c!--nl--\"\u003e\u003cp\u003e\u003cspan\u003eBirch aircraft plywood is very light brown in color; cut edges, surface, and line engravings are black and may lightly rub off. Each sheet is virtually flawless on the front, with slightly more knots and plugs potentially present on the back. \u003c\/span\u003e\u003cspan\u003eDue to the manufacturing process, density may vary slightly. Due to their thickness, the sheets may warp slightly or not be perfectly flat. \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":49169017733467,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"polyester-pet-vilt-zwart","title":"Polyester (PET) felt","description":"\u003cp\u003ePET felt sheets are panels made from recycled PET (polyethylene terephthalate) and are often used for acoustic and decorative applications. The sheets are lightweight, fire-retardant, and have acoustic properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eApplications for PET felt include sound insulation, decorative elements, (exhibition) displays, and high-end packaging.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut edge of PET felt is harder than the material itself due to melted fibers. Line engravings are possible but virtually invisible. However, engraved lines can be used to make the material more flexible\/\u003cspan\u003ehinged\u003c\/span\u003e. Surface engravings are not possible due to melt formation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut is neat, clean, and the same color as the material. Line engravings are the same color as the material. The (slightly) melted edges are somewhat smooth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET felt does not require post-processing. No stains from the cutting process are visible on the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material is supplied without protective film. The sheets are smooth, fibrous, and completely black.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"height: 97.976px;\" width=\"100%\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003e\n\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003eDensity\u003c\/td\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003e0.13 grams \/ cm3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003eThickness tolerance\u003c\/td\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003e\u0026lt;10%\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003eUV resistant\u003c\/td\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003eNo\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Black","offer_id":50166586179931,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":54046261051739,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Gray","offer_id":54046261084507,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Purple","offer_id":54046261117275,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Light blue","offer_id":54046261150043,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Yellow","offer_id":54046261182811,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":54046261215579,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Brown","offer_id":54046261248347,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Dark green","offer_id":54046261281115,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Dark blue","offer_id":54046261313883,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Pink","offer_id":54046261346651,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Orange","offer_id":54046261379419,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false}]},{"product_id":"acrylaat-mat","title":"Matte acrylic","description":"\u003cdiv id=\"materialLoadCustom\" data-material=\"Acrylaat mat antraciet\" data-only-material=\"\"\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMatte acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, semi-transparent plastic. The material has a finely matted surface on two sides. The matted surface feels and looks sandblasted, but the effect is achieved during the casting process and results in a less \"sharp\" texture than with sandblasted surfaces. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSatin acrylic has many applications, mainly in decorative industries. The material can be found in display cases, interior design, displays, facade advertising, (name) signs, and scale models, among other things. It is very beautiful when used with LED lighting, as the translucent light is softly diffused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAlso, acrylic in thin or long strips is relatively fragile and susceptible to warping due to the heat released during cutting, so take this into account in the design.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAcrylic has protective film on both sides, which fully protects the sheets before, during, and after cutting. The cut is clean, smooth, and the same color as the material. Engraved areas have a slightly whiter color compared to the material. \u003c\/p\u003e\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If the design contains engraved areas, we must remove the film from the top, in some cases a small amount of smoke may adhere to the material or small scratches may occur.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can subsequently be glued, printed, sawn, sanded, milled, and bent. For each processing step, it is important to take into account that the cutting process puts pressure on the cutting edge; if the acrylic is subsequently processed, small cracks may occur in some cases. \u003c\/p\u003e\u003cp\u003eTo give line and area engravings greater contrast, they can be filled with paint (color fill). If the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eDepending on whether there are engraved areas in the design,\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ethe material has protective film on both the front and back, or only on the back. The material is sensitive to scratches without protective film.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eSatin acrylic has a matte\/satin surface on both sides of the material. The material is opaque but translucent. Line and area engravings have a matte white appearance. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/span\u003e\u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Orange","offer_id":49441481294171,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":54047151653211,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":49441481195867,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Moss green","offer_id":49441481064795,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Light blue","offer_id":49441480999259,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark blue","offer_id":49441481097563,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Lime green","offer_id":49441481032027,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark pink","offer_id":49441480966491,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Light pink","offer_id":49441481228635,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Glass","offer_id":49441481261403,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Champagne","offer_id":49441481359707,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-fluor","title":"Fluorescent acrylic","description":"\u003cdiv id=\"materialLoadCustom\" data-material=\"Acrylaat fluor blauw\" data-only-material=\"\"\u003e\u003c\/div\u003e\u003cp\u003eFluorescent acrylic (PMMA), also known under the brand names Plexiglas and Perspex, is a hard, semi-transparent plastic. The material is very similar to tinted acrylic but distinguishes itself by a number of unique characteristics. Fluorescent acrylic is more transparent than tinted acrylic, but edges (and also engravings) light up in the material. This effect can be enhanced by illuminating the sheet from the side. The material is available in orange, yellow, blue, green, and red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFluorescent acrylic has many applications, primarily in decorative industries. The material can be found in showcases, interior design, displays, (illuminated) advertising, (name) signs, and models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to consider the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. Also, acrylic in thin or long strips is relatively fragile and susceptible to warping due to the heat released during cutting, so take this into account in the design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAcrylic has protective film on both sides, fully protecting the sheets before, during, and after cutting. The cut is clean, sharp, and the same color as the material. Engraved areas have a slightly whiter color compared to the material.\u003c\/p\u003e\u003cp\u003eIf the design only contains cut and engrave lines, we leave the film on both sides. If the design contains engraved areas, we must remove the film from the top side, in some cases, a small amount of smoke may adhere to the material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn principle, acrylic does not need post-processing due to the high quality of the material. The material can subsequently be glued, printed, sawn, sanded, milled, and bent. For each operation, it is important to consider that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks can sometimes occur.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDepending on whether the design contains engraved areas, the material has protective film on both the front and back, or only on the back. The material is scratch-sensitive without protective film.\u003c\/p\u003e\u003cp\u003eFluorescent acrylic has a slight surface gloss and is (colored) transparent. Surface and line engravings have a matte white appearance and are clearly visible. All parts are securely packed in a box and, if necessary, supported with wood.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Rood","offer_id":49444447846747,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Geel","offer_id":49444447879515,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Groen","offer_id":49444447912283,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Blauw","offer_id":49444447945051,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Oranje","offer_id":49444447977819,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-translucent","title":"Coloured acrylic","description":"\u003cdiv id=\"materialLoadCustom\" data-material=\"Acrylaat blauw\" data-only-material=\"\"\u003e\u003c\/div\u003e\u003cp\u003eAcrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard plastic. The material is available in various colours, UV resistant, and suitable for both indoor and outdoor use. The sheets are opaque but do allow a small amount of light to pass through. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTranslucent acrylic has many applications, primarily in decorative industries. Acrylic can be found in display cases, interior construction, displays, facade advertising, (name) signs, and models, among other things. \u003c\/p\u003e\u003cp\u003eBecause the material has high impact resistance and is 25x stronger and 50% lighter than glass, it is often used as a replacement for glass. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breaks. Acrylic in thin or long strips is also relatively brittle and susceptible to warping due to the heat released during cutting; keep this in mind in the design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAcrylic has protective film on both sides, ensuring the sheets are fully protected before, during, and after cutting. The cut is clean, smooth, and the same colour as the material. Engraved areas have a slightly whiter colour compared to the material. \u003c\/p\u003e\u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the film on both sides. If there are engraved areas in the design, we must remove the film from the top side; in some cases, a small amount of smoke residue may then appear on the material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn principle, acrylic does not need to be post-processed due to the high quality of the material. The material can subsequently be glued, printed, sawn, sanded, milled, and bent. With every process, it is important to take into account that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks can occur in some cases. \u003c\/p\u003e\u003cp\u003eTo give line and surface engravings greater contrast, they can be filled with paint (colour fill). If the excess paint is then removed, the paint remains in the grooves. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDepending on whether there are engraved areas in the design, the material has protective film on both the front and back, or only on the back. Without protective film, the material is susceptible to scratches.\u003c\/p\u003e\u003cp\u003eAcrylic has a slight surface sheen; surface engravings have a matte white appearance. Engraved lines are clearly visible up close. All parts are securely packed in a box and, if necessary, supported with wood. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Orange","offer_id":49701053399387,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":49701053497691,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":49701053137243,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":49701053268315,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":49701053170011,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark blue","offer_id":49701053333851,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Dark green","offer_id":49701053301083,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Light pink","offer_id":54047151718747,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Dark pink","offer_id":49701053366619,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Champagne","offer_id":54047151751515,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Purple","offer_id":49701053464923,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Bordeaux","offer_id":49701053202779,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Orange-yellow","offer_id":49701053432155,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":54047609651547,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Matte\/Glossy Mint Green (RAL 6024)","offer_id":54047151784283,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false}]},{"product_id":"acrysign-acrylaat","title":"Acrysign (Acrylic)","description":"\u003cdiv data-only-material=\"\" data-material=\"Acrysign (Acrylaat) Mat\/Glans Zwart (RAL 9005)\" id=\"materialLoadCustom\"\u003e\u003c\/div\u003e\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0); text-decoration: underline;\"\u003eMint green Acrysign is being phased out. Please call for current stock.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eAcrysign (also available as Acrylox) acrylic is an 8mm thick opaque PMMA sheet available in various colours. The material has a finely matted surface on one side, and a high-gloss finish on the other side. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAcrysign is primarily used for facade letters and logos, both indoors and outdoors. The material can also be used for applications requiring (coloured) thick acrylic. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to consider the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. Also, acrylic in thin or long strips is relatively fragile and susceptible to warping due to the heat generated during cutting; take this into account in the design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAcrylic has protective film on both sides, fully protecting the sheets before, during and after cutting. The cut is clean, smooth and the same colour as the material. Engraved areas have a slightly whiter colour compared to the material. \u003c\/p\u003e\u003cp\u003eIf the design only contains cutting and engraving lines, we leave the film on both sides. If the design contains engraved areas, we must remove the film from the top side, in some cases a small amount of smoke may mark the material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eImportant: by default, we place the sheet with the satin (matt) side up in the machine. If you would like the sheet cut with the high-gloss side up, please indicate this in the comments field when ordering. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn principle, acrylic does not need to be post-processed due to the high quality of the material. The material can be subsequently glued, printed, sawn, sanded, milled and bent. For each operation, it is important to consider that the cutting process puts pressure on the cutting edge; if the acrylic is then processed, small cracks may occur in some cases. \u003c\/p\u003e\u003cp\u003eTo give line and area engravings greater contrast, they can be filled with paint (colour fill). When the excess paint is subsequently removed, the paint remains in the grooves. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eDepending on whether the design contains engraved areas,\u003c\/span\u003e the material has protective film on both the front and back or only on the back. The material is susceptible to scratches without protective film.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAcrysign is completely opaque. Line and area engravings have a matte white appearance. All parts are securely packed in a box and, if necessary, supported with wood. \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Mat\/Glans Nachtblauw (RAL 5022)","offer_id":49701156028763,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Oranje (RAL 2004)","offer_id":49701156061531,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Signaalrood (RAL 3001)","offer_id":49701156094299,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Ultramarijn Blauw (RAL 5002)","offer_id":49701156127067,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Verkeersblauw (RAL 5017)","offer_id":49701156159835,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Verkeersgeel (RAL 1023)","offer_id":49701156192603,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Verkeersrood (RAL 3020)","offer_id":49701156225371,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Wit (RAL 9016)","offer_id":49701156258139,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Zwart (RAL 9005)","offer_id":49701156290907,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Geelgroen (RAL 6018)","offer_id":49701156323675,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Grijs (RAL 7016)","offer_id":49701156356443,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Mat\/Glans Mintgroen (RAL 6024)","offer_id":51378719883611,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"mdf-wit","title":"MDF white","description":"\u003cp\u003eWhite MDF (medium density fibreboard) is a fibre board material made by pressing wood fibres together under high pressure and applying a white (foil) coating to one side. The material has a smooth surface and does not splinter because it has no grain direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe applications for white MDF are diverse. The material is widely used in furniture, artworks, models, and packaging, among other things. For projects that need to be perfectly white, the material is a very suitable solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, smoke residue will be present on the top and bottom of the material around the cut and engravings. Due to the white colour on the front side of the material, this residue is more visible than with other materials. Smoke residue can be prevented on both sides by protective film. The cuts are dark brown\/black and engravings are dark brown.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMDF can easily be mechanically processed afterwards by sawing, drilling, milling, and sanding. Please note that this can damage\/remove the white side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMDF is brown in colour and has a white front due to a lacquer-ready foil layer. The material has a very smooth surface and does not splinter. The material absorbs water very easily and is therefore not suitable for damp environments. Cut edges and engravings are brown in colour. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50164952957275,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"acrylaat-transparant-geextrudeerd-xt","title":"Clear extruded acrylic (XT)","description":"\u003cp\u003eExtruded (XT) Transparent acrylic (PMMA), also known by the brand names Plexiglas and Perspex, is a hard, transparent plastic. The material distinguishes itself from regular acrylic by the precise thickness tolerance on the material obtained through the production process, namely the rolling of the sheet material. Due to this process, this type of acrylic is very suitable for dimensionally stable applications. A disadvantage of extruded acrylic is that there is more tension on the material and therefore small (hairline) cracks can occur in the edge due to gluing or incorrect cleaning agents. Also, the material is not suitable for surface engravings due to this extra tension. The material is UV resistant and suitable for both indoor and outdoor use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTransparent acrylic has many applications, mainly in decorative industries. This acrylic is mainly found in applications requiring high dimensional stability such as model building, assembly kits, and (small) mechanization.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when cutting acrylic. For finger joints, it is important to take into account the thickness tolerances of acrylic to prevent internal stresses and thus cracks or breakage. Also, acrylic in thin or long strips is relatively fragile and susceptible to warping due to the heat released during cutting, keep this in mind in the design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic has protective film on both sides, which fully protects the sheets before, during, and after cutting. The cut is clean, smooth, and the same color as the material. Engraving surfaces have a slightly whiter color compared to the material. \u003c\/p\u003e\n\u003cp\u003eIf there are only cutting and engraving lines in the design, we leave the film on both sides. If there are engraving areas in the design, we must remove the film from the top side; in some cases, a small amount of smoke may mark the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn principle, acrylic does not need post-processing, and for extruded acrylic, this is also discouraged due to the extra tension on the material. It cannot be glued, sawed, or bent. \u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50165492842843,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"gefineerd-eikenhout","title":"Double-sided oak-veneered MDF","description":"\u003cp\u003eVeneered Oak (A\/B) is a high-quality veneered wood type. The core consists of a layer of brown HDF, and both sides are covered with the highest quality natural oak veneer available on the market. The veneer gives the panel a solid wood appearance. The advantage of veneered MDF over a solid wood panel is that MDF hardly warps. \u003c\/p\u003e\n\u003cp\u003eVeneered MDF is available in different types of wood veneer, each with a unique grain and color. The sheet material has a flawless visible side (A) and a virtually flawless reverse side (B). \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis variant is specifically suitable for applications where both the front and back are visible. \u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe applications for veneered MDF are mainly aesthetic; the material is often used for high-quality finishes, POS materials, and for applications that require a natural look. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVeneered wood has a grain direction, which is generally vertical on a full panel, but can also be horizontal depending on how the panel is cut. If the grain direction is important, this must be specified in advance. Veneer is a natural product, so the panels may differ slightly in grain and color. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, there will be smoke residue on the top and bottom of the material around the cut and engravings. On both sides, the smoke residue can be prevented by protective film. The cuts are dark brown\/black, and engravings are dark brown. Due to the charring on the cut, it is not visible that the core material is MDF; the panels appear solid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVeneered MDF can be easily mechanically post-processed by sawing, drilling, milling, and sanding. The material can also be varnished or oiled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material is light brown in color and has the structure of natural oak. The material absorbs water very easily and is therefore not suitable for damp environments. \u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50173886890331,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"biopanel","title":"Biopanel","description":"\u003cp\u003e\u003cspan\u003eBio panel sheets are made from industrial hemp and Organic PLA. The sheets are biobased, meaning they are made from biological products, and the material is also biodegradable. The sheets are produced in Europe. They are dark brown in color. Unlike other bioplastics, Bio panel is suitable for outdoor applications, with the sheets lasting at least 10 years. Bio panel is CO2 neutral.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eApplications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBio panel is a good bioplastic alternative to Trespa and Dibond; its properties are largely similar to these materials. The sheets can be easily printed and stickered. Because the sheets last at least 10 years, even with outdoor use, they are well-suited for applications such as: signage, displays, and wayfinding.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLaser Cutting\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material cuts like regular plastic; the cut is clean and sharp. This also applies to area engravings. The cutting process can cause residue on the underside of the material, which can be prevented with protective film. Residue on the top side primarily results from area engravings, but cutting and engraving lines also contribute to this; residue on the top side of the material can be prevented by protective film on the top side.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAppearance\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material is dark brown in color (comparable to Ral 8017) and has a natural look. The color may vary slightly between sheets. UV light causes the sheet to fade slightly, but this does not compromise the quality of the material.\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50309334139227,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"gefineerd-eikenhout-a-r","title":"Single-sided oak-veneered MDF","description":"\u003cp\u003eVeneered Oak (A\/R) is a high-quality veneered wood. The core consists of a layer of brown HDF, the front is covered with the highest quality natural oak veneer the market has to offer, and the back with a \"red\" layer of okoume counter veneer to prevent the panels from warping. The veneer gives the board a solid wood appearance. The advantage of Veneered MDF over a solid wood panel is that MDF hardly warps. \u003c\/p\u003e\n\u003cp\u003eVeneered MDF is available in different types of wood veneer, each with a unique grain and color. The sheet material has a flawless visible side (A) and an okoume red back. \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis type is specifically suitable for applications where only the front is visible. \u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe applications for veneered MDF are mainly aesthetic; the material is often used for high-quality finishes, POS materials, and for applications requiring a natural look. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVeneered wood has a grain direction, which is generally vertical on a full panel, but can also be horizontal depending on how the panel is cut. If the grain direction is important, this must be indicated beforehand. Veneer is a natural product, so the panels may differ slightly in grain and color. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, there will be smoke residue on the top and bottom of the material around the cut and engravings. On both sides, the smoke residue can be prevented by protective film. The cuts are dark brown\/black and engravings are dark brown. Due to the burning on the cuts, it is not visible that the core material is MDF; the panels appear solid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVeneered MDF can easily be mechanically processed afterwards by sawing, drilling, milling, and sanding. The material can also be lacquered or oiled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material is light brown in color and has the structure of natural oak. The material absorbs water very easily and is therefore not suitable for damp environments. \u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50369987903835,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"gefineerd-notenhout-enkelzijdig","title":"Single-sided walnut-veneered MDF","description":"\u003cdiv id=\"materialLoadCustom\" data-material=\"Gefineerd Notenhout Enkelzijdig\" data-only-material=\"\"\u003e\u003c\/div\u003e\u003cp\u003eVeneered Walnut (A\/R) is a high-quality veneered wood type. The core consists of a layer of brown HDF, the front is covered with the highest quality natural walnut veneer the market has to offer, and the back with a \"red\" layer of okoume balancing veneer to prevent the boards from warping. The veneer gives the board a solid wood look. The advantage of veneered MDF over a solid wood board is that MDF hardly warps.\u003c\/p\u003e\u003cp\u003eVeneered MDF is available in various types of wood veneer, each with a unique pattern and color. The sheet material has a flawless visible side (A) and an okoume red back. \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis type is specifically suitable for applications where only the front is visible.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe applications for veneered MDF are mainly aesthetic; the material is often used for high-quality finishes, POS materials, and for applications requiring a natural look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVeneered wood has a grain direction, which is generally vertical for a full sheet but can also be horizontal depending on how the sheet is cut. If the grain direction is important, this must be indicated in advance. Veneer is a natural product, so the boards may vary slightly in pattern and color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAfter laser cutting, there will be smoke residue on the top and bottom of the material around the cut and engravings. The smoke residue can be prevented on both sides by protective film. The cuts are dark brown\/black, and engravings are dark brown. Due to the burning at the cut, it is not visible that the core material is MDF; the boards appear solid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVeneered MDF can be easily mechanically processed afterwards by sawing, drilling, milling, and sanding. The material can also be lacquered or oiled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe material is light brown in color and has the structure of natural walnut. The material absorbs water very easily and is therefore not suitable for humid environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e\u003ctable style=\"height: 97.976px;\" width=\"100%\"\u003e\u003ctbody\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e0.7 gram \/ cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eThickness tolerance\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eUV resistant\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eSuitable for outdoor use\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 19.5952px;\"\u003eNo\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery from 1-2 working days possible\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":50678866477403,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"gefineerd-mahonie-enkelzijdig","title":"Single-sided mahogany-veneered MDF","description":"\u003cdiv id=\"materialLoadCustom\" data-material=\"Gefineerd Notenhout Enkelzijdig\" data-only-material=\"\"\u003e\u003c\/div\u003e\n\u003cp\u003eVeneered Mahogany (A\/R) is a high-quality veneered wood. The core consists of a layer of brown HDF, the front is covered with the highest quality natural mahogany veneer available on the market, the back with a \"red\" layer of okoume balancing veneer to prevent warping of the panels. The veneer gives the panel a solid wood appearance. The advantage of veneered MDF over a solid wood panel is that MDF hardly warps. \u003c\/p\u003e\n\u003cp\u003eVeneered MDF is available in different types of wood veneer, each with a unique grain and color. The sheet material has a flawless front (A) and an okoume red back. \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis type is specifically suitable for applications where only the front is visible. \u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe applications for veneered MDF are primarily aesthetic; the material is often used for high-quality finishes, POS materials, and for applications requiring a natural look. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVeneered wood has a grain direction, which is generally vertical on a full panel, but can also be horizontal depending on how the panel is cut. If the grain direction is important, this must be specified in advance. Veneer is a natural product, so the panels may differ slightly in grain and color. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter laser cutting, there will be smoke residue on the top and bottom of the material around the cut and engravings. On both sides, smoke residue can be prevented by protective film. The cuts are dark brown\/black and engravings are dark brown. Due to the burning on the cut, it is not visible that the core material is MDF; the panels appear solid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVeneered MDF can be easily mechanically processed afterwards by sawing, drilling, milling, and sanding. The material can also be lacquered or oiled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material is light brown in color and has the structure of natural mahogany. The material absorbs water very easily and is therefore not suitable for humid environments. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical information\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"height: 97.976px;\" width=\"100%\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003e\n\n\u003cspan\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003e\u003cspan\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003eDensity\u003c\/td\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003e0.7 gram \/ cm3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003eThickness tolerance\u003c\/td\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003e\u0026lt;10%\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003eUV resistant\u003c\/td\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003eNo\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003eSuitable for outdoor use\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\u003ctd style=\"height: 19.5952px;\"\u003eNo\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDelivery time: Delivery possible from 1-2 working days\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":51192793465179,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"linde-multiplex","title":"Linde plywood","description":"\u003cp\u003eBasswood plywood is a lightweight, fine-grained sheet material with a smooth surface. The wood structure is subtle and virtually knot-free, making it highly suitable for sleek designs and precise detailing. Due to its soft wood type, it is easy to work with. The wood type can best be described as a combination of the advantages of birch and poplar plywood: it is sturdy, has a smooth surface, is lightweight, and does not splinter. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIdeal for architectural models, decorative objects, product packaging, interior decoration, typography, and other applications where a light color and fine engraving are desired. Also suitable for DIY kits because the material does not splinter. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign Considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBasswood is relatively soft and therefore susceptible to indentations or scratches with intensive use. Small details are well possible, but thin parts can be fragile when bent or stressed. Wood can slightly discolour under the influence of sunlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cutting edges of basswood plywood turn brown\/black and do not rub off. On the top side of the material, there will be a minimal amount of smoke residue around the cut, while on the underside, the smoke residue is more prominent. Unfortunately, protective film is not possible with this material because it does not stick (well) to it. \u003cspan\u003eAny smoke residue can easily be removed with sandpaper. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePost-processing of basswood plywood is not necessary. It can be glued, sanded, and painted well. Any lightly burned edges can be easily removed with fine sandpaper. Varnishing or oiling enhances the warm color contrast of the wood.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBasswood plywood is very pale yellow to cream in color, even and fine in structure. Cutting edges and surface and line engravings are dark brown and do not rub off. Every board is completely flawless on the front and back.\u003c\/span\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":51192962154843,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"sam-pure-grass-biobased-vezelplaat","title":"SAM Pure Grass biobased fiberboard","description":"\u003cp\u003eSAM Pure Grass is a bio-based sheet material made from pressed grass fibres and natural binders, produced in the Netherlands. It has a characteristic, fibrous structure with visible natural inclusions. The material is sturdy, lightweight and compostable, and offers a sustainable alternative to conventional wood and plastic sheets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExtremely suitable for sustainable packaging, POS material, product displays, eco-design, educational models and decorative elements with a natural look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the fibrous structure, fine details at the edges may crumble. Large surfaces remain stable, but the material is less suitable for very thin components or structural loads. When designing, consider slight colour variations between sheets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the production process, the material retains black residue on and around the cut. The residue hardly rubs off. Protective film reduces residue on the surface of the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSAM Pure Grass can be easily post-processed mechanically by sawing, drilling, milling and sanding. Also suitable for gluing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material has a natural, matte appearance with visible fibres on the surface. Light green to beige with colour nuances. The material absorbs water very easily and is therefore not suitable for damp environments. \u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":51193005965659,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"houtkarton-wit","title":"White wood pulp board","description":"\u003cp\u003eNatural white wood pulp board made from 100% wood pulp, acid-free and pH-neutral. It has a smooth and solid surface with excellent \u003cspan\u003eflatness\u003c\/span\u003e—a sturdy and reliable material for various creative applications. Unlike solid cardboard, the edge (cut) barely sheds due to the composition of the material. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eSuitable for drawing, printing, model making, crafting, and other creative projects where a sturdy, white base is desired.\u003c\/span\u003e\u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003ca class=\"flex h-4.5 overflow-hidden rounded-xl px-2 text-[9px] font-medium text-token-text-secondary! bg-[#F4F4F4]! dark:bg-[#303030]! transition-colors duration-150 ease-in-out\" alt=\"https:\/\/www.gerstaecker.nl\/Houtkarton-wit.html?utm_source=chatgpt.com\" rel=\"noopener\" href=\"https:\/\/www.gerstaecker.nl\/Houtkarton-wit.html?utm_source=chatgpt.com\" target=\"_blank\"\u003e\u003cspan class=\"relative start-0 bottom-0 flex h-full w-full items-center\"\u003e\u003cspan class=\"flex h-4 w-full items-center justify-between\"\u003e\u003cspan class=\"max-w-full grow truncate overflow-hidden text-center\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are few restrictions when designing with wood pulp board. Due to the fibrous nature of the material, small parts may tear or break. It is therefore recommended to avoid long or thin parts as much as possible. \u003cspan\u003eWithout protective film on the underside, the material may show a slight black residue from the laser bed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWood pulp board can be cut relatively quickly. The cut is black and barely sheds. Engraved lines and areas are dark brown to black and may shed slightly on large surfaces. Protective film reduces smoke residue from surface engraving. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWell suited for processing: drawings or prints adhere well. The material can be worked with a knife or scissors, or glued with all-purpose glue or wood glue. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"\u0026gt; Verkrijgbaar in verschillende afmetingen: 900x600mm, 600x600mm, 600x300mm, 900x300mm, 300x300mm\\n\u0026gt; Sterk, buigzaam materiaal met een hoge slijtvastheid.\\n\u0026gt; Gladde afwerking, splintert niet\\n\u0026gt; Overschilderbaar, er wordt aangeraden dit in meerdere lagen te doen.\"}' data-sheets-userformat='{\"2\":14780,\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":3,\"14\":[null,2,0],\"15\":\"Calibri\",\"16\":11}' style=\"box-sizing: border-box;\"\u003eThe sheets are smooth and have a natural white finish. The core of the material is brown after laser cutting.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Default Title","offer_id":51193151160667,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"graveerplaat-zwart-wit","title":"Engraving plate","description":"\u003cp\u003e\u003cspan\u003eEngraving laminate is a two-layer plastic sheet material based on an acrylic composite with a matte black top layer and a white bottom layer. Specially developed for engraving: when the top layer is removed, sharp white contrast appears. The material is lightweight and suitable for both indoor and outdoor applications.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for signage, nameplates, industrial labels, pictograms, front panels and interior applications where durable contrast is desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign considerations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its two-tone construction, this material is ideal for flat engravings (not for deep 3D engravings). When designing, ensure sufficient thickness of lines and text for optimal readability. Small details remain sharp, but rounded corners provide extra durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVery suitable for laser engraving and cutting. Engraving produces clear white contrast with little additional post-processing. The matte top layer prevents reflection. Cut edges are clean and slightly glossy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter engraving, residue must be removed; this can easily be done with a damp cloth. For stubborn spots, a small amount of alcohol can be used. Can be easily glued to various surfaces. Clean with a soft cloth and mild soap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe material does not have protective film on either side but is not very susceptible to scratches. The material has a matte black surface with bright white engraving.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"laserlokaal","offers":[{"title":"Black\/white","offer_id":51210558931291,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Red\/white","offer_id":54046261412187,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Green\/white","offer_id":54046261444955,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false},{"title":"Blue\/white","offer_id":54046261477723,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0025\/2058\/0194\/collections\/materialen-352905.png?v=1715596168","url":"https:\/\/laserlokaal.nl\/en\/collections\/materialen.oembed","provider":"Het Laser Lokaal","version":"1.0","type":"link"}