Supply your own material

We keep many materials in stock and can deliver many more within a few working days, but it may happen that you are looking for a material that we do not supply. We also cut on request on supplied materials. On this page, you will find the guidelines for supplying materials yourself.

Format

We can cut most materials up to a maximum of 130x90cm. Some materials can be larger, up to 250x130cm.

Type of Materials

Below are some examples of the materials we can cut:

- Textiles (both organic and synthetic, no vinyl or PVC)

- Woods (up to a maximum of 12mm thick depending on the type of wood)

- Plastics (up to a maximum of 20mm thick depending on the type of plastic, no PVC)

- Rubbers (up to a maximum of 3mm)

- Foam rubbers and foam types (up to a maximum of 50mm)

- Films and cardboard (no PVC)

- Unfortunately, we cannot process metals.

Important

Providing material is entirely at your own risk. Supplied materials must not contain hazardous substances, nor release hazardous substances during or after laser cutting. We absolutely do not cut materials that contain PVC or Vinyl (including Skai). 

How should I supply my own materials?

If you want to supply your own material, it is best to contact us first. We can then provide you with an exact price or an estimated price based on your drawing (depending on whether we are familiar with the material) and possibly arrange an appointment to test the material. After that, you can deliver the material to us or have it delivered, and we will carry out the task for you.